Senin, 30 Juli 2012

Download and install - update Galaxy S Plus GT I9001 with Official Value Pack XXKQI Gingerbread 2.3.6 Firmware

How to Update Galaxy S Plus GT I9001 with Official Value Pack XXKQI Gingerbread 2.3.6 Firmware

Procedure to update Galaxy S Plus I9001 with Official Gingerbread XXKQI 2.3.6 Firmware:

Download the Gingerbread XXKQI 2.3.6 Firmware Package and Odin v4.43 from here to your computer. Once downloaded, extract both the files and open Odin in your computer. Turn off the computer so that it can be entered in the download mode.

Download mode in your Samsung Galaxy S Plus can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which a green robot will be shown indicating the Download Mode has been entered. Up next, connect Galaxy S Plus GT I9001 to the computer using the USB cable which you got at the time of purchase.

Ensure that the ID : COM section in Odin is turned yellow as it means that all the drivers are installed successfully which you can get from the Samsung’s Official website.

Click on “OPS” tab and select “AriesVE.ops” , click on “PDA” tab and select the file “I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5” which you can find from extracted files and click on “Start”. It will take around 4 – 5 minutes to apply this update. Once it’s done, the phone will be rebooting and once you see the Language preferences option or say country selector, you can disconnect the device from computer.

Once the firmware is applied successfully and you see the home screen, disconnect the device connected from the computer and turn off the device so that it can be entered in the recovery mode.

In recovery mode, select Wipe data/factory reset and also you need to select Wipe Cache partition and then reboot your device by selecting reboot system now. This will clear of all the cache data present in your device and will make sure that there are no force close errors arise in the normal usage of your phone.

Note: Just in case if the device doesn’t boot up or say gets into the boot loop sequence, you need to long press the power button or reinsert the battery to turn off the device and retry the whole process from start.

To check on whether the device is updated or not, you can check the same from the path “Settings > About Phone” where you can see that the current firmware version is Gingerbread XXKQI 2.3.6. Do share with us in the comments section just in case if you face any issues and we will try out level best to sort out the same.

Download Manual install and Update Galaxy Tab 7.7 with ICS 4.0.4 XXLQ1 Firmware

Procedure to Update Galaxy Tab 7.7 with ICS 4.0.4 Firmware:

Download the ICS 4.0.4 Firmware Package from here to your computer. Once downloaded, you need to connect your Galaxy Tab with the computer using the original USB cable and then followed by which place the downloaded zip file in your device. Ensure that you are not placing the file deep into any of the sub folders.

Once the file is placed, disconnect the device connected from the computer and turn off the same so that it can be then entered in the recovery mode. Press the Volume Up + Power keys together so that it can be entered in the recovery mode. If the device turns On in the normal mode, you need to again retry the process of firmware update.

Now, in the recovery mode, select “install zip from sd card” > “choose zip from sd card” and then choose the P6800XXLQ1_ICS_IT168.zip which you have placed in the device. Once its selected, it will take around 4 – 5 minutes for applying he update. As soon as its updated, you will see that you will be asked with the Language preferences setting and then you will have to disconnect the device connected from the computer. To check on the firmware has been updated or not, you need to check from the path Settings > About Tablet > Firmware Version where you will see that the firmware version as 4.1. In the next coming days, we will be coming up with more custom ROM firmwares.

Note: Just in a rare case if your Samsung device refuses to turn ON or say if it gets stuck on the Samsung Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from the start.

So there you go you have now successfully updated your device with the latest firmware of the ICS 4.0.4 in your Samsung Galaxy Tab 7.7. Do let us know in the comments section just in case if you face any issues in the comments section below.

Download and install - update Samsung Galaxy S2 GT I9100 with Official ICS 4.0.4 XWLPO Firmware

How to Update Samsung Galaxy S2 GT I9100 with Official ICS 4.0.4 XWLPO Firmware

Procedure to Update Galaxy SII GTI9100 with Official ICS 4.0.4 XWLPO:

Download ICS 4.0.4 XWLPO Firmware package & Odin from here to your computer. Once downloaded, extract the same to get the tar file and Odin executable file. Now, open Odin in your computer and turn off your phone so that it can be entered in the download mode.

Download mode in Galaxy S II GT I9100 can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which a green robot will be shown indicating the Download Mode has been entered.

Connect your Galaxy S2 with your computer / Laptop and then in Odin you will see that the ID : COM section will turn Yellow indicating that all the drivers are installed successfully.

Note: If ID : COM section doesn’t turn Yellow, you need to check with two things which are mentioned below,

Install the USB Drivers in your computer &
Go to the Path “Settings > Wireless & Network > USB Settings” and ensure that “Samsung KIES” option is ticked before connecting the phone to the computer.

Once the ID: COM section is turned Yellow then click on “Start” for applying the firmware update. It will take around 4 -5 minutes for applying the update. Once the device is updated, the device will be rebooted and then you need to disconnect the device.

Now, turn Off the device so that it can be entered in the recovery mode. Recovery mode in Samsung Galaxy S II I9100 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

As soon as the device is rebooted, you can check the same whether the firmware update has been applied or not from the path “Settings > About phone > Firmware version” where it will be mentioned as XWLPO.

Note: Just in a rare case if the device is not updated and it gets into the boot loop mode, you need to again clear the cache from the recovery mode and retry the whole process from the start.

So there you go you have now successfully updated the device with the latest firmware XWLPO in your Galaxy S2 GT I9100. Do share with us in the comments section just in case if you face any issues in the comments section below.

Download and install - update Galaxy Note N7000 with Cyanogen Mod 10 Preview Firmware

How to Update Galaxy Note N7000 with Cyanogen Mod 10 Preview Firmware

Procedure to Update Samsung GALAXY Note N7000 with Cyanogen mod 10 Preview:

Download the Cyanogen mod 10 Preview & Google Apps Package in your computer and then connect your device to the computer with the help of original USB cable. Place the downloaded zip file in your phone. Ensure that you are not placing the file deep into the sub folders.

Once you have placed the zip files, disconnect the device and turn off the device so that you can then enter your Galaxy Captivate in the recovery mode.

Galaxy Note N7000 can be entered in the recovery mode by pressing Volume Down Key + OK button, and holding both simultaneously press the Power Button. Now, a Warning message will be shown when you need to press the Volume Down key to continue entering the Recovery Mode.

Select “install zip from sd card” > “choose zip from sd card” and select the Cyanogen mod 10 preview zip file which you have placed in your device and then the Google Apps Package. It will take around 6 – 8 minutes for applying this update. After this, you need to select “++++ Go Back ++++” and then select “reboot system now” to reboot the phone in the ICS Android 4.0.3 firmware.

Now, in recovery mode, select options Wipe data/factory reset” and “Wipe Cache partition” to get away from the force close issues. Now, in recovery mode, select “go back” and “reboot system now” for rebooting the device in the normal mode. To check on the firmware has been updated or not, you need to check from the path Settings > About Phone > Firmware Version where you will see that the firmware version as 4.1.

Note: Just in a rare case if your Samsung device refuses to turn ON or say if it gets stuck on the Samsung Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from the start.

So there you go you have now successfully updated your device with the Cyanogen mod 10 Preview. Do let us know in the comments section just in case if you face any issues in the comments section below.

xda

Download and install - update Galaxy Captivate i897 with Slim ROM Jellybean 4.1.1 Firmware

Fully compiled from AOSP source ( source.android.com) with my mods and interesting ones from CM/AOKP.
Read the changelog and installation instructions on the website carefully.
Feature requests will be ignored in general but will review ( if a relevant commit is provided) and decide
No ports based on my ROM zip file, manifest.xml will be updated regularly and feel free to compile from source

Flash them in the order described.

Dpi etc are usual Slim stuff.

Changelog/Download:

For the latest changelog/download like go here

Currently all source are from source.android.com

Support via thanks or donate button. Please don't fill up the thread with "this is great" etc. Just hit thanks button. Cheers.

Credits are fully described here

Minggu, 29 Juli 2012

Hi Duck (bada - wave game)

It’s a shooting game developed for the touch screen mobile phone. Players play as hunters shooting ducks. Players can shoot ducks by touching screen when ducks appeared on the screen. The key is to get scores as high as possible in the prescribed time. There're many hidden props in the game. Players need to explore.

Free Download

Hockey Nations 10 (bada - wave game)

It seems as if the Distinctive developments app development company has taken upon themselves to develop all the best sports games for the Bada platform. The Hockey nations Shootout is the newest addition to their already huge and still growing mobile sports gaming app repository. The gameplay is based on shoot outs in an Ice Hockey match and is totally based on touch controls to find out more about the app just read on.