Download and install - Update Galaxy Note 2 with Android Revolution HD Custom Firmware

 

Procedure to Update Galaxy Note 2 with XXALJ3 Jellybean 4.1.1 Android Revolution Custom ROM Firmware:

• Download the Galaxy Note 2 with XXALJ3 Jellybean 4.1.1 Android Revolution Custom ROM Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip file in the external SD Card.

• Once the zip file is copied, disconnect the phone and turn Off the device so that it can be entered in the recovery mode.

• Hold the Volume Up button + the Home key button (the middle button) and while holding these both keys, press the Power button for turning the device ON in the recovery mode in your Galaxy Note 2 N7100.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition” and then select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware.

• After this, select “install zip from sd card” > “choose zip from sd card” and then choose the Omega Custom ROM Firmware Package which you have placed in your Galaxy Note 2 N7100 smartphone.

• It will take around 4 -5 minutes for applying the update, as soon as the update is applied, select “go back” and then choose the option of “reboot system now” for rebooting the device. Please be informed that for the 1^st reboot it may take longer time than expected.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Congratulations, you have now successfully learnt on how to apply this XXALJ3 Jellybean 4.1.1 based Android Revolution Custom ROM firmware. Do let us know in the comments section just in case if you face any issues in the process of applying this firmware update.

Download and install - Update & Root Galaxy Note 2 N7100 with Jellybean 4.1.1 XXALJ1 Firmware

 

Procedure to Update Galaxy Note N7100 with Pre Rooted XXALJ1 Jellybean 4.1.1 Firmware:

• Download the Pre Rooted XXALJ1 Jellybean 4.1.1 Firmware Package from here to your computer along with Odin flash tool. Extract both of these packages in your computer.

• Open Odin in your computer and turn off your Galaxy Note 2 device so that it can be entered in the Download mode.

• The download mode in Galaxy Note N7100 can be entered by pressing  Volume Down Key + OK button, and holding both simultaneously press the Power Button. Now, a Warning message will be shown when you need to press the Volume Up key to continue entering the Download Mode.

• Once you connect your device, you will see that the ID: COM section will turn Yellow or Bluish green depending upon the Odin version indicating that all the required drivers are installed successfully and you are ready to proceed with the next step.

• Click on “PDA” to select “N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar.md5” and then click on Start to start the process of firmware update for updating the firmware. As soon as the firmware is updated successfully, the device will get rebooted and once you see the home screen, you can then disconnect your Galaxy Note 2 device.

• It will take around 4 -5 minutes for applying the update and also it may take longer time for the first reboot.

Note: Just in a rare case if your Samsung device refuses to turn ON or say if it gets stuck on the Samsung Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from beginning.

So there you go you have now successfully upgraded as well as rooted your Samsung Galaxy Note 2 N7100 device. To check on whether your device is rooted or not, you will have to download the “Root Checker” app from the Google PLAY Store.

Download and install - Update Galaxy Note 2 N7100 with Omega Custom ROM Firmware

 

   

How to Update Galaxy Note 2 N7100 with Omega Custom ROM Firmware

Procedure to Update Galaxy NOTE N7000 with Omega Custom ROM Firmware:

• Download Omega Custom ROM Firmware Package from here to your computer. Once downloaded, connect your Galaxy Note 2 device to the computer with the help of original USB cable and place the zip file in your device and disconnect the same to turn off your Galaxy Note so that it can be entered in the recovery mode.

• Hold the Volume Up button + the Home key button (the middle button) and while holding these both keys, press the Power button for turning the device ON in the recovery mode in your Galaxy Note 2 N7100.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition” and then select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware.

• After this, select “install zip from sd card” > “choose zip from sd card” and then choose the Omega Custom ROM Firmware Package which you have placed in your Galaxy Note 2 N7100 smartphone.

• It will take around 4 -5 minutes for applying the update. As soon as the update is applied successfully, the device will be rebooting automatically. Please note that it may take longer time than expected for rebooting the device.

• To check on whether your device is updated with the latest firmware version or not, you will have to navigate to the Settings > About Phone where the firmware version will be mentioned as Omega Custom ROM Firmware.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

So there you go, you have now successfully learnt on how to update the Galaxy Note 2 N7100 with the latest Omega custom ROM firmware which apparently is the 1^st custom ROM firmware for the latest Galaxy Note 2 smartphone. Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.

How to Root Galaxy Note 2 N7100 ?

 

Procedure to Root Galaxy Note 2 N7100 Android Phone:

• Download the Rooting Package for Galaxy Note 2 N7100 smartphone and odin from here to your computer. Once downloaded, extract the same.

• Turn Off your device so that it can be entered in the download mode. The download mode in Galaxy Note 2 N7100 can be entered in recovery mode by pressing the Volume Up rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode.

• Connect your Note 2 with your computer / Laptop and then in Odin you will see that the ID : COM section will turn Yellow indicating that all the drivers are installed successfully.

Note: If ID : COM section doesn’t turn Yellow, you need to check with two things which are mentioned below,
        Install the USB Drivers in your computer &
        Go to the Path “Settings > Wireless & Network > USB Settings” and ensure that “Samsung KIES” option is ticked before connecting the phone to the computer.

• Click on “PDA” to select “cwm6-root-note2.tar.md5” and once you have selected the file, click on “Start” for starting the process of firmware update. Once the rooting process is completed successfully, the device will be restarted. Please be informed that the device will take longer time than expected for rebooting the device. You can disconnect the device once you see the home screen.

• To check your device is rooted or not, you can check the same from the app “Root Checker” which can be downloaded from the Google PLAY Store. If the device is rooted it will show that the device is rooted, just in case if the device is not rooted then you will have to repeat the whole process.

Note: Just in a rare case if your Galaxy Note 2 device doesn’t boot up or say if it refuses to how up the home screen, then Long press the power button to turn it Off and follow all the above instructions again from the start.

So, there you go you have now successfully rooted your device on the latest firmware. Do let us know in the comments section just in case if you face any issues.