Download and install - Update Galaxy SL I9003 with S3 Styled REMICS v1.7 ICS Custom ROM Firmware

 

   

Procedure to Update Galaxy SL I9003 with remics ICS Custom ROM Firmware:

• Download the Remics Custom ROM Firmware Package from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB cable and then place the zip file in your device. Disconnect the device and turn off the phone so that it can be entered in recovery mode. The recovery mode can be entered by pressing the Volume Down Key + OK button, and holding both simultaneously press the Power Button.

• In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the Remics Custom ROM Firmware Package which is placed in the phone. It will take around 3 – 4 minutes for applying the update. Also, you will see that the device might just stay on the S Logo for more than 3 -4 minutes.

• Once the update process is completed, the device will again land back to the recovery screen. In the recovery screen, select “++++ Go Back ++++” and then choose the option of “reboot system now” for rebooting the system. If in any case if you come across the force close errors then all you need to do is to just enter the device in the recovery mode and wipe all the cache data as well as wipe all the data present in your device.

Tip: Just in case if due to some reasons if the update process gets failed or interrupted, then you need to apply the update again by following the steps again from the start. Don’t forget to restore the backup which you have taken in the initial steps.

So there you go, you have now successfully installed the latest firmware update of Remics in your device. Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Download and install - Update Samsung Galaxy SL I9003 with Resurrection Remix Custom ROM Firmware

   

Procedure to Update Galaxy SL I9003 with Resurrection Remix Custom ROM Firmware:

• Download the Resurrection Remix custom ROM firmware package from here along with the Google Apps Package to your computer. Once downloaded, connect your phone to the computer and place these files in your device.

• Make sure that you are not placing the zip files deep into the sub folders. Once placed, disconnect the phone connected from computer and Open the ROM Manager app in your Samsung Galaxy SL I9003 to select the option of “Flash Clock Work mod Recovery” and then once its flashed successfully, select “Reboot into Recovery Mode” option in ROM Manager.

• In recovery mode, select “install zip from sd card” > “choose zip from sd card” and then choose the Resurrection Remix firmware package which you have placed in the device along with the Google Apps Package. It will take around 3 -5 minutes for applying the update.

• Once the firmware is updated successfully, the device will be rebooted and you will be prompted to enter the Google Account and Wi Fi Settings. Please note that if you face any force close errors, then enter the device in the recovery mode and select “Wipe data/factory reset” & “Wipe Cache partition” and then select “advanced” and clear the Dalvik cache.

• To check on whether the firmware has been updated or not, you can navigate to the path “Settings > About Phone” where you will get to see the details as shown in the below screen capture.

Note: If at all your Samsung Galaxy SL I9003 gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go, you have now successfully learnt on how to apply this firmware update in your Samsung Galaxy SL I9003.

Download and install Update Galaxy SL I9003 with Jellybean 4.1.1 Codename 3.5.0 Firmware

 

How to Update Galaxy SL I9003 with Jellybean 4.1.1 Codename 3.5.0 Firmware

Procedure to Update Galaxy SL GT I9003 with Codename Android 3.5.0 Firmware:

• Download the Codename Android 3.5.0 Firmware package & Google Apps from here to your computer. Once downloaded, connect your phone to computer and place these two zip files in your device. Ensure that you are not placing these files into the sub folders.

• Disconnect the device and turn off the same so that it can be entered in the recovery mode. Press and hold the Volume Up + Home buttons together, and then press the Power button till you see the Green Android Robot along with the Recovery mode options list. If the device boots up in the normal mode, retry the process.

• You can also boot the device in the recovery mode by selecting the appropriate option in the recovery mode. In recovery mode select “install zip from external SD Card” to find the placed “Codename Android 3.5.0 Firmware package” and also the “Google Apps”. Once it’s selected it will take around 4 -5 minutes for applying the same.

• Once you see that the firmware has been applied successfully, select “go back” & “reboot system now” for rebooting the device in the normal mode. To check on whether the firmware has been applied or not, you can head over to the path “Settings > About Phone” which will show that the firmware has been applied successfully.

Note: Just in a rare case if your Samsung Galaxy SL I9003 refuses to turn ON or say if it gets stuck on the Motorola Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from the start.

So there you go, you have now successfully installed the latest version of Codename Android 3.5.0 firmware in your device. Do share with us in the comments section just in case if you face any issues.