Download and install - Update Galaxy S3 GT I9300 with XXDLI1 Jellybean 4.1.1 Firmware

 

Procedure to Update Galaxy S3 with XXDLI1 Jellybean 4.1.1 Firmware Update

• Download XXBLG8 ICS Firmware Package and XXDLI1 Jelly Bean Firmware package from here to your computer. Connect your device to the computer with the help of original USB cable and place these two zip files in your phone and disconnect the device.

• Now, turn off the phone so that it can be entered in the recovery Mode. Recovery mode in Galaxy S III GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button).

• While holding these both buttons, turn ON your device. In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. Also, select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware.

• Select “install zip from sd card” > “choose zip from internal sd card” and then select the XXBLG8 ICS Firmware Package and XXDLI1 Jelly Bean Firmware package which you have placed in your device in the same manner. Once you have selected the file, it will take around 3 – 4 minutes for applying the same.

• Please note that initially it will take more than 4 -5 minutes for turning the device ON and will get stuck on the S Logo for a while. Just in case if you are getting the force close errors, turn off your phone and enter the same in the recovery mode. In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition” for clearing all the data which is creating the force close errors.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully applied the latest update of Jellybean in your S3 which you can check the same from the path “Settings > About Phone”.

Viber for bada (unmodified- spoof)

 

 

As we all waited for some good social networking application for our Samsung waves VIBER has at last released it for Bada .But the bad thing is that there is no calling option available right now it says.

Free Download

Download and install MIUI Android 4.1.1 Jelly Bean ROM on AT&T Galaxy S3

 

• The process may result in losing all of your data like apps, messages, contacts etc. So first of all take back up of all data to work risk-free.
• Uninstall the antivirus from device (if any).
• Don’t let the power of the device to create any problem for you. So keep your device charged at least 50 percent.
• Install ClockworkMod recovery on your phone.
• Download the zip file of the  ROM here.
• Download GAPPS.zip from here.
• Make sure to save  files on internal SD card of phone.
• Press the VOL DOWN + HOME + POWER buttons to enter into the recovery mode.
• You can scroll through the options by pressing Volume Up and Down button. To make selection of any option, press the Power button.
• Now select the ‘Install Zip From SD Card’ option and choose the .zip file of the ROM from your SD card.
• Select ‘Yes, Install__.zip’  to proceed further with the process.
• The whole process is done. Be patient for the update to get completed. Generally it takes about 2-3 minutes.
• Follow the last three steps to install GAPPS.zip on your AT&T Galaxy S3.
• After the reboot, your AT&T Galaxy S3 will be running on MIUI Android 4.1.1 Jelly Bean ROM.

That’s it. So now start enjoying your AT&T  Galaxy S3 running on MIUI Android 4.1.1 Jelly Bean ROM . The process is very simple and I hope you will follow it properly.

Download and install - Update Galaxy SL I9003 with Super Stable EHNDROIX ICS based Firmware

 

Procedure to Update Samsung Galaxy SL I9003 with ICS EHNDROIX Firmware:

• Download the EHNDROIX Custom ROM & S3 Styled Package from here to your computer. Once downloaded, connect your phone to the computer with the USB cable and place these two zip files in your device. Don’t put the files deep into the sub folders.

• Disconnect the device and turn off the phone so that it can be entered in recovery mode. The recovery mode can be entered by pressing the Volume Down Key + OK button, and holding both simultaneously press the Power Button.

• In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the EHNDROIX Firmware Package which is placed in the phone and then followed by which you need to select the S3 styled Package.

• Once the update process is completed, the device will again land back to the recovery screen. In the recovery screen, select “++++ Go Back ++++” and then choose the option of “reboot system now” for rebooting the system. If in any case if you come across the force close errors then all you need to do is to just

Tip: Just in case if due to some reasons if the update process gets failed or interrupted, then you need to apply the update again by following the steps again from the start. Don’t forget to restore the backup which you have taken in the initial steps.

If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.
Congratulations, you have now successfully applied this all new ICS based firmware in your device. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Download and install - Update Galaxy S2 GT I9100 with ICS based Simplistic Custom ROM Firmware

   

his custom ROM firmware is based on the latest XXLPU firmware which comes with one of the stable Modem and smooth UI.

Procedure to Update Galaxy S2 GT I9100 with ICS 4.0.3 Simplistic Custom ROM firmware:

• Download the Simplistic Custom ROM Firmware Package & Google Apps Package from here to your computer. Once downloaded, connect your phone to the computer using the Original USB cable and place these two zip files in your computer.

• Now, you can enter the device into the recovery mode by two ways, one is by ROM Manager app and other method is by manual method. For manual method, turn off your Galaxy S2 and hold the Volume Up button + the Home key button (the middle button) and while holding these both keys, press the Power button for turning the device ON in the recovery mode.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. Also, select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware.

• Up next,  select “install zip from sd card” > “choose zip from sd card” and then choose the Simplistic Custom ROM firmware Package & Google Apps package which you have placed in your Galaxy S2.

• It will take around 4 -5 minutes for applying this update. Once the device is updated, the device will land up in the recovery mode screen. Select “Go Back” and select “Reboot system now” for rebooting the device in the normal mode. Be informed that for the first reboot, it will take longer time than expected which may take even more than a minute.

• To check on whether the device has successfully been updated or not, you will have to check the same from the path “Settings > About Phone > Firmware Version”.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully applied the update of ICS Android 4.0.3 based Simplistic custom ROM firmware.

Download and install - update Samsung Galaxy mini S5570 with Jellybean 4.1.1 CM10 Firmware

 

Procedure to Update Galaxy mini S5570 with Jellybean 4.1.1 Firmware Update:

• Download the Jellybean CM 10 Firmware Package from here to your computer along with the Google Apps Package. Once downloaded, connect your device to the computer with the help of original USB cable and place these two zip files in your device.

• Once copied, disconnect the device and turn off the same so that it can be entered in the recovery mode.

• The recovery mode in the Galaxy mini S55700 can be entered by Holding Menu Button and then Power ON the device. If the device turns ON in the normal mode then you need to try again to enter into the recovery mode. In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition” so that this will clear the cache which is there in your device.

• Now, in the recovery mode you will need to select “install zip from sd card” > “choose zip from sd card” > Jellybean 4.1 Firmware package and then select the Google Apps Package which you have placed in your phone in the same order.

• Please note that it will take more time than expected for booting the device. Once it’s booted, you will see that the device is updated with the latest firmware upgrade. It will take around 4 -5 minutes for applying this update.

• Just in case if you get any force close errors, turn off your phone so that it can be entered in the recovery mode. In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition” so that all the cache data gets flushed and all your apps will run seamlessly.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Congratulations, you have now successfully applied the latest firmware of Jellybean 4.1.1 firmware update in your device. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Download and install - T-Mobiles Delivers Android 4.0 ICS Update to Samsung Galaxy S II

 

Android 4.0 Ice Cream Sandwich operating system is by far one of the best and most contradicting devices. If you happen to be the T-Mobile user using Samsung Galaxy S II you will be interested to know that there is updated been available to the device and it’s the big one to the Android 4.0 Ice Cream Sandwich. T-Mobile has finally rolled out the much awaited Android 4.0 update to the device. So just when we were expecting the Jelly Bean update, ICS has been delivered. So the Android version on your phone will be Android 4.0.3 but not the 4.0.4 and this is based on the T989ULVH1 software version.

This update brings a lot of goodies and most of them are the regular Android 4.0.3 stuff with face unlock, exclusive data management, better user interface and lot more. Surprisingly this is not the usual way of getting an update as you need to update your device using the Samsung KIES but not through Over the Air update. The list of the improvement and enhancements included in this is update is not generous though the T-Mobile says the new firmware comes with various bug fixes. The change log also points out that certain ISIS/NFC updates have been applied to your device. So this will bring the mobile payment on your device via the accepted merchandise stores in United States, a better alternative to Google Wallet.

So if you want go get this update on your device then connect your device using the USB Cable to the PC and open Samsung KIES. You should have the latest version of the KIES installed on your device and once connected you need to follow the on screen instructions to apply the updates. You should take the backup of your device before updating your device and you should have 50 % of battery life left on your device.

T-Mobile Samsung Galaxy S II will receive Android 4.0.4 ICS update within a month time or so and then it will be delivered with Android 4.1 Jelly Bean, as the usual trends says regarding all the Samsung Android devices.