Download and install - Update Galaxy s3 Root on XXDLIH Jellybean 4.1 Firmware

 

Procedure to Root Galaxy S3 on XXDLIH Jellybean 4.1 Firmware:

• Download Odin and XXDLIH Rooting Package from here to your computer. Once downloaded, you now need to extract the rooting package and Odin in your computer.

• Open odin in your computer and turn off your phone so that it can be entered in the Download Mode.

• Download Mode in Galaxy S3 can be entered by pressing the Volume Down rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode. Refer below video on how to enter your Galaxy S3 in the Download Mode.

• Click on “PDA” to select “CF-Root-SGS3-v6.4.tar” and then click on “Start”. Once you click on start, it will take around 2 – 3 minutes for rooting the device. Please note that once the device is rooted, the device will be rebooted automatically.

• You can now disconnect the device and check whether the device is rooted or not. To check on whether your device is rooted or not, you will have to download the “Root Checker” app from the Google PLAY Store. If your device is not rooted, you will have to follow the instructions mentioned above for rooting your Galaxy S3.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

We just hope that by following the above mentioned procedure, you were able to root the device, just in case if you were not able to root, all you need to do is to just report to us in the comments section so that we can then take up in a priority manner. Congrats, you have now successfully rooted your Galaxy S3 and you are now ready to install custom ROM firmwares.

Download and install - Update Verizon Wireless Galaxy S3 with ULE based Clean ROM Jellybean 4.1.1 Firmware

 

Procedure to Update VZW Galaxy S3 with Jellybean 4.1.1 Clean ROM Firmware:

• Download the VZW Galaxy S3 with Jellybean 4.1.1 Clean ROM Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip file in the external sd card.

• Disconnect the device and turn off the device so that it can be entered in the recovery mode. Recovery mode in Galaxy S2 GT I9100 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device. In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode.

• Alternatively, you can also enter the device into recovery mode with the help of ROM Manager app. Now, in recovery mode select “install zip from sd card” > “choose zip from internal sd card” and then choose the Android revolution custom ROM firmware Package

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

To check on whether the firmware has been successfully applied or not, all you need to do is to just head over to the path “Settings > About Phone” where in you can check the same on the firmware has been updated or not. Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Download and install - Update Galaxy S3 I9300 with Capon Mod Jellybean 4.1.2 Custom ROM Firmware

 

Procedure to Update Galaxy S3 GT I9300 with Jellybean 4.1.2 firmware based Capon ROM:

• Download the Capon ROM firmware zip Package from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB cable and place this zip file in your device’s external SD Card.

• Now, disconnect the Galaxy S3 connected to your computer and turn Off your device so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” to select the Capon ROM Custom ROM Firmware Package which you have placed in your device. Once selected, it will take around 4 – 7 minutes for applying the update. As soon as the update is applied successfully, select “go back” and “reboot system now” for rebooting the device in the normal mode.

• For your phone to show the home screen, it might take longer than expected time as it is the first time after installing the firmware update.

• Once the update is applied, select the option of “Go Back” and “Reboot System now” for rebooting the device in the normal mode. Since it’s a first reboot, it will take more time than the normal mode as it has to finalize all the apps etc.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Samsung Galaxy S3 GT I9300 with the Capon Mod custom ROM.

Download and install - Update Galaxy S3 I9300 with Capon Mod Jellybean 4.1.2 Custom ROM Firmware

 

Procedure to Update Galaxy S3 GT I9300 with Jellybean 4.1.2 firmware based Capon ROM:

• Download the Capon ROM firmware zip Package from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB cable and place this zip file in your device’s external SD Card.

• Now, disconnect the Galaxy S3 connected to your computer and turn Off your device so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” to select the Capon ROM Custom ROM Firmware Package which you have placed in your device. Once selected, it will take around 4 – 7 minutes for applying the update. As soon as the update is applied successfully, select “go back” and “reboot system now” for rebooting the device in the normal mode.

• For your phone to show the home screen, it might take longer than expected time as it is the first time after installing the firmware update.

• Once the update is applied, select the option of “Go Back” and “Reboot System now” for rebooting the device in the normal mode. Since it’s a first reboot, it will take more time than the normal mode as it has to finalize all the apps etc.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Samsung Galaxy S3 GT I9300 with the Capon Mod custom ROM.
 

Download and install - Update Galaxy S3 with Official Jellybean 4.1.1 XXDLIH Firmware

 

Procedure to Update Galaxy S3 GT I9300 with XXDLIH Jellybean 4.1.1 Firmware:

• Download the XXDLIH Jellybean 4.1.1 Firmware package and Odin from here to your computer. Once downloaded, extract the files in your computer.

• Once extracted, open Odin and turn off your Galaxy S3 so that it can be entered in the download mode. Download Mode can be entered by pressing the Volume Down rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode. You can refer to the below mentioned video to know more on how to enter the device in the download mode.

• In download mode, connect your device to the computer with the help of original USB cable and click on “PDA” in Odin to select the tar file which you got after extracting the XXDLIH firmware. Ensure that the ID : COM section in Odin has turned yellow or else the firmware can’t be applied.

• Once you click on Start, you will see a progress bar which will indicate the progress of the firmware update in your Galaxy S3. It will take round about 5 – 8 minutes for applying the update. As soon as the firmware is update, you will see the home screen in your computer.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Samsung Galaxy S3 GT I9300 with the Official jellybean 4.1.1 XXDLIH firmware.

Download and install - Update Galaxy S3 GT I9300 with XXDLIJ Jellybean 4.1.1 WanamLite ICS Custom ROM Firmware

 

Procedure to Update Galaxy S3 GT I9300 with XXDLIJ Jellybean 4.1.1 WanamLite ICS Custom ROM Firmware:

• Download the WanamLite Custom ROM firmware package from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB cable and then place the downloaded zip file in your phone.

• Once placed, disconnect the phone and turn off the device so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S III GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button).

• While holding these both buttons, turn ON your device. In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. Also, select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware.

• Select “install zip from sd card” > “choose zip from internal sd card” and then select the “Wanam lite Custom ROM Firmware Zip File”. Once you have selected the file, it will take around 3 – 4 minutes for applying the same.

• It may take 2 – 3 minutes for turning ON the device and for showing the language selection and country selection options since it’s the first boot after the firmware update.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Once you see the home screen, get over to the path “Settings > About Phone” where you will get to see the firmware version as Wanam Lite custom ROM firmware. Do leave a comment below if you come across with any of the unusual thing about this Wanam Lite custom ROM firmware.

Download and install - Update Galaxy S3 GT I9300 with Jellybean 4.1 based Dragon ROM

 

Procedure to Update Galaxy S3 GT I9300 with Dragon Custom ROM Firmware:

• Download the latest Dragon Custom ROM Firmware which is based on the Jellybean 4.1.1 firmware in your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place this zip file in the external SD Card.

• Once you have placed the zip file, disconnect the device from computer and turn off your phone so that it can be entered in the recovery mode.

• In recovery mode, select “install zip from sd card” > “choose zip from sd card” and then choose the Dragon Custom ROM Firmware package which you have placed in the. As soon as the update is applied, it will take around 3 -5 minutes for applying the update.

• Once the firmware is updated successfully, the device will be rebooted and you will be prompted to enter the Google Account and Wi Fi Settings. Please note that if you face any force close errors, start your phone in recovery mode to select “Wipe data/factory reset” & “Wipe Cache partition” and then select “advanced” and clear the Dalvik cache.

• To check on whether the firmware has been updated or not, you can navigate to the path “Settings > About Phone” where the current firmware version will be shown as XXDLIB based Dragon custom ROM Firmware

Note: If at all your Samsung Galaxy S3 GT I9300 gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So, there you go you have now successfully learnt on how you can apply this Dragon custom ROM firmware which is very high on the features list.

Download and install - Update Samsung Galaxy S3 I9300 Omega v27.2 Jellybean 4.1.1 Custom Firmware

 

Procedure to update Galaxy S3 GT I9300 with Omega v 27.2 Custom ROM firmware:

• Download the Omega v 27.2 Custom ROM Firmware Package from here to your computer. Once downloaded, connect your phone to the computer and place the zip file in your external sd card and not in your phone memory.

• Disconnect the device from computer and turn off your Galaxy S3 so that it can be entered in the recovery mode. Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” and then choose the Omega Custom ROM Firmware which you have placed in your phone. It will take around 4 -5 minutes for applying the update.

• Once the update is applied, select the option of “Go Back” and “Reboot System now” for rebooting the device in the normal mode. Since it’s a first reboot, it will take more time than the normal mode as it has to finalize all the apps etc.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Galaxy S3 with the Omegas v27.2 custom ROM Firmware.

Download and install - Update Galaxy S3 GT I9300 with Root Box Jellybean 4.1.2 Firmware

 

How to Update Galaxy S3 GT I9300 with Root Box Jellybean 4.1.2 Firmware

Procedure to Update Galaxy S3 GT I9300 with Jellybean 4.1.2 Firmware:

• Download the Root Box Jellybean 4.1.2 Custom ROM Firmware and Google APPS Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the 2 downloaded zip files in your device.

• Disconnect the device from computer and turn off your Galaxy S3 so that it can be entered in the recovery mode. Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” and then choose the Root Box Jellybean 4.1.2 Custom ROM Firmware and Google APPS Package which you have placed in your phone. It will take around 4 -5 minutes for applying the update.

• Once the update is applied, select the option of “Go Back” and “Reboot System now” for rebooting the device in the normal mode. Since it’s a first reboot, it will take more time than the normal mode as it has to finalize all the apps etc.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Galaxy Nexus I9250 with the latest Jellybean 4.1.2 Firmware.

Download and install - Update Galaxy S3 with Jellybean 4.1.1 WanamLite Custom ROM Firmware

 

Features of WanamLite Custom ROM Firmware for Samsung Galaxy S3:

• Based on latest Jelly bean update
• Deodexed & Rooted & Zipaligned
• Unlimited SMS recipient list
• 15 Toggle buttons
• Repacked & Tweaked & Insecure stock kernel (tweaks will still works on other custom kernels)
• Automatic SMS encoding (Arabic and other utf-8 encoding support)
• Tweaked Pegasusq Governor for better Battery life
• Large APN list
• No incremental ringtone
• Enabled Call recording
• 4 Way reboot (Recovery,Download…)
• Clean build.prop for best Market compatibility
• Stock Keyboard with all supported languages enabled
• Kies support
• Hacked Stock Email App
• Latest CWM Recovery update
• Latest SuperSu update
• Rooted+ insecure Tweaked Stock kernel with init.d support
• Enabled all supported languages
• Multi CSC (+80)

• How to Update Galaxy S3 with Jellybean 4.1.1 WanamLite Custom ROM Firmware

  
  
  Procedure to Update Samsung Galaxy S3 GT I9300 smartphone with WanamLite Custom ROM Firmware:
  
• Download the Wanam Lite custom ROM Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place this zip file in your Samsung Galaxy S3’s external SD Card.

• Once the file is placed, disconnect the phone and turn off your device so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” and then choose the Wanam Lite custom ROM Firmware Package which you have placed in your phone. It will take around 4 -5 minutes for applying the update.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully learnt on how to apply this update in your Galaxy S3.

•  

Download and install - Update Galaxy S3 with Jellybean 4.1.1 based Turkbey Custom ROM firmware

 

Procedure to Update Galaxy S3 with the Turkbey Custom ROM Firmware:

• Download the Turkbey Custom ROM Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and move the zip file to your external SD card which is there in your Galaxy S3 device.

• Don’t place the zip file in the internal memory of your S3 as it won’t detect the zip package. After placing the file, disconnect the device and turn off the same so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” and then choose the Turkbey Custom ROM Firmware which you have placed in your phone. Once it’s selected, it will take around 4 -5 minutes for applying the update. As soon as the update is applied, you will be needing to enter the Google Account settings along with other settings which you can find in the below mentioned video.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So, there you go, you have now successfully applied the latest Turkbey custom ROM firmware in your Samsung Galaxy S3 GT I9300 smartphone.

Download and install - Root Galaxy S3 GT I9300 on XXDLIB Jellybean 4.1.1 Firmware

 

Procedure to Root Samsung Galaxy S3 I9300 on XXDLIB 4.1.1 Firmware:

• Download the XXDLIB 4.1.1 Rooting Package and Odin from here to your computer. Once downloaded, turn off your phone so that you can then enter your phone in the download mode.

• Extract the Odin zip to get Odin executable file and XXDLIB Rooting Package to get the tar file. Open Odin in your computer and turn off your phone so that it can be entered in the download mode.

• Download Mode in Galaxy S3 can be entered by pressing the Volume Down rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode. You can alternatively, enter your phone in the download mode with the help of below mentioned Video tutorial.

• Click on “PDA” to select “CF-Root-SGS3-v6.4.tar” and then click on “Start”. Once you click on start, it will take around 2 – 3 minutes for rooting the device.

• As soon as the device is rooted, the device will be rebooted. Once you see the home screen, you will have to disconnect the device from the computer.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

So there you go you have now successfully rooted your device. To check on whether your device is rooted or not, you will have to download the “Root Checker” app from the Google PLAY Store. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Download and Update Galaxy S3 I9300 with Clockwork Mod Touch Recovery 6.0.1.2

 

• Ensure that the minimum charge left in your phone is not less than 30%. Navigate to the path “Settings > Applications > Development > USB debugging”, enable the USB Debugging. All the antivirus tools should be turned off as these tools tend to interrupt the process of firmware update.

• To check on whether your device is rooted or not, you will have to download the “Root Checker” app from the Google PLAY Store.

So assuming that you are done with all the above mentioned instructions, you can now head over to the next step where we have summed up a detailed guide on how to apply with this custom recovery image.

Procedure to Install Custom Recovery Image in Samsung Galaxy S3 I9300:

• Download the Latest Clockwork Mod Touch Recovery 6.0.1.2 Image and Odin from here to your computer and connect your phone to the compute with the help of original USB cable and place this recovery file in your external SD Card and not in the internal memory.

• Disconnect the phone and turn off the device so that it can be entered in the download mod. Download mode in your Galaxy S3 GT I9300 device can be entered by holding the Volume Down button + the Home key button (the middle button). If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode.

• Now, open odin in your computer and connect your phone in the download mode. Once you connect the device, the ID : COM section in odin becomes Blue indicating that the required drivers have been installed and then click on “PDA” to select “CF-Root-SGS3-v6.4.tar” file. After selecting the file, click on “Start” to start the process of custom recovery installation.

• You will see a progress bar which will indicate the progress of the custom recovery installation with minutes in Odin. Once the device is restarted and the home screen is shown in your phone, you can disconnect the phone connected from computer.

Note: Just in a rare case if your Samsung Galaxy S III refuses to turn ON or say if it gets stuck on the Samsung Galaxy Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from the start.

So there you go, you have now successfully flashed the latest Clockwork Mod Touch Recovery 6.0.1.2 Image in your Galaxy S3 smartphone. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Root Galaxy S3 GT I9300 on XXDLIB Jellybean 4.1.1 Firmware

 

Procedure to Root Samsung Galaxy S3 I9300 on XXDLIB 4.1.1 Firmware:

• Download the XXDLIB 4.1.1 Rooting Package and Odin from here to your computer. Once downloaded, turn off your phone so that you can then enter your phone in the download mode.

• Extract the Odin zip to get Odin executable file and XXDLIB Rooting Package to get the tar file. Open Odin in your computer and turn off your phone so that it can be entered in the download mode.

• Download Mode in Galaxy S3 can be entered by pressing the Volume Down rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode. You can alternatively, enter your phone in the download mode with the help of below mentioned Video tutorial.

• Click on “PDA” to select “CF-Root-SGS3-v6.4.tar” and then click on “Start”. Once you click on start, it will take around 2 – 3 minutes for rooting the device.

• As soon as the device is rooted, the device will be rebooted. Once you see the home screen, you will have to disconnect the device from the computer.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

So there you go you have now successfully rooted your device. To check on whether your device is rooted or not, you will have to download the “Root Checker” app from the Google PLAY Store. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Download and install - Update Sprint Galaxy S3 SPH L710 with Jellybean 4.1.1 Firmware

 

How to Update Sprint Galaxy S3 SPH L710 with Jellybean 4.1.1 Firmware

Procedure to Update Samsung Galaxy S3 SPH L710 with Jellybean 4.1.1 Firmware:

• Download Firmware Package from here to your computer.
• Odex
  SPRINT JELLY BEAN LEAK
  MD5: 45BA4316C4A32788194C0B04ED7E5BFC
  
  DeOdex
  SPRINT JELLY BEAN LEAK
  MD5: 4B571B05D41D2F589BAFF84E27C0DD3F
  
  LIF Firmware:
  LIF Firmware/modem/baseband update
  
  Changelog:
  9/30/12:
  -Added Jelly Bean boot animation
  -Modified kernel to adb shell @ root, bootanimation support, and a few other tweaks.
  -Fixed root. 
•  Once you have downloaded in your computer, place the same in the external micro SD Card of your Galaxy S3 smartphone.

• Disconnect the device from computer and turn off your computer so that you can then enter your phone in the recovery mode. Recovery mode can be entered by pressing the Volume Up rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode.
• In recovery mode, select “install zip from sd card” > “choose zip from internal sd card” and then choose the Jellybean firmware Package which you have placed in your phone. Once it’s selected, it will take around 4 -5 minutes for applying the update. Also, note that it may take longer time than the normal time for the first reboot.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

To check on whether the firmware has been successfully applied or not, all you need to do is to just head over to the path “Settings > About Phone” where in you can check the same on the firmware has been updated or not where you will get the firmware version as Jellybean 4.1.1 update.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Very soon there will be many more Jellybean 4.1.1 firmwares which will be rolled out which too will be covered here.

•  xda

Download and install - Update Galaxy S3 GT I9300 with Official Jellybean 4.1.1 XXDLIB Firmware

 

How to Update Galaxy S3 GT I9300 with Official Jellybean 4.1.1 XXDLIB Firmware

Procedure to Update Galaxy S3 GT I9300 with Official Jellybean 4.1.1 firmware XXDLIB:

• Download the XXDLIB Firmware package and Odin from here to your computer. Once downloaded, extract the firmware zip file and Odin in your computer.

• Open Odin in your computer and turn off your phone so that it can be entered in the download mode. With the help of below mentioned interactive Video tutorial, you can enter your phone in download mode.

• Alternatively, you can also enter your device in the recovery mode by pressing the Volume Down rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode.
•  
• In download mode, connect your device to the computer with the help of original USB cable and click on “PDA” in Odin to select the tar file “I9300XXDLIB_I9300OXFDLI1_I9300XXDLIB_HOME.tar.md5”. Ensure that the ID : COM section in Odin has turned yellow or else the firmware can’t be applied.

• Once you click on Start, you will see a progress bar which will indicate the progress of the firmware update in your Galaxy S3. It will take round about 5 – 8 minutes for applying the update. As soon as the firmware is update, you will see the home screen in your computer.

• Once you see the home screen, disconnect the phone and head over to the Settings > About Phone where you will find the firmware update details and it should show the firmware version as XXDLIB.
• Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Download and install - Update Galaxy S2 & Galaxy S3 with AOKP 3.0 Firmware Version

 

Procedure to Update AOKP 3 Firmware Update in Galaxy S2 and in Galaxy S3 Device:

• Download the below mentioned corresponding firmware from here to your computer and Google Apps package. Once downloaded, you will have to connect the phone to the computer and place these two files in your device. Kindly select the appropriate file for your Galaxy Smartphone or else it may even brick the phone.

AOKP 3 for Galaxy S2,

AOKP 3 for Galaxy S3

• Once you have placed the file in your phone, turn off the device so that it can be entered in the recovery mode.

• Recovery mode in your Galaxy S2 or S3 device can be entered by holding the Volume Up button + the Home key button (the middle button). In recovery mode, select Clear cache and wipe all the data present in your phone so as to make sure that there are no force close errors after applying this update.

• In recovery mode, select “install zip from sd card” > “choose zip from sd card” and then choose the placed AOKP Firmware Package. Once the file selection is over, the firmware will be applied within 10 minutes, you can see the progress of firmware update with the help of a progress bar. As soon as you see the home screen, select “Go Back” to select the option of “reboot system now” for rebooting the device in the normal mode.

Note: Just in a rare case if your Samsung Galaxy S III refuses to turn ON or say if it gets stuck on the Samsung Galaxy Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from the start.

So there you go, you have now successfully updated your device with this AOKP 3 firmware. Do share with us in the comments section just in case if you face any issues as we will try to address the same.

Download and install - Update Galaxy S3 LTE I9305 with Official Jellybean 4.1.1 XXALI5 Firmware

 

Step-By-Step Instructions:

Step 1 - Download Android 4.1.1 I9305XXALI5 for Galaxy S3 to your computer and extract the zip file.

Step 2 - Download ODIN v1.85 which will help you to install Android 4.1.1 on Samsung Galaxy S3 I9305.

Step 3 - Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4 - Make sure you have your Galaxy S3 USB drivers installed on your computer.

Step 5 - Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6 - If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 - Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.

• Click on ‘PDA’ and select file with ‘CODE’ in its name.
• Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
• Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
• Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.

Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.

Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 - After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.

That’s it. Your Samsung Galaxy S III LTE has now been updated to Android 4.1.1 build XXALI5 firmware update. Go to Settings > About phone to verify.

Hit +1 or LIKE as a thanks to us!

If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.

Install ClockworkMod Recovery (CWM) on Samsung Galaxy S3 GT-I9300

 

How to Install ClockworkMod Recovery (CWM) on Samsung Galaxy S3 GT-I9300

• The process may result in losing all of your data like apps, messages, contacts etc. So first of all take back up of all data to work risk-free.
• Uninstall the antivirus from device (if any).
• Don’t let the power of the device to create any problem for you. So keep your device charged at least 50 percent.
• Download the ClockworkMod from here.
• Download Odin v3.04 from here
• Extract Odin3_v3.04.zip
• Enter your Galaxy S3 into download mode by pressing the Volume Down + Power + Home buttons together.
• Now connect your Galaxy S3-I9300 to your computer by using USB cable.
• On successful attachment, you will see the “Added” message in Odin window.
• In Odin, click the PDA button and select the ClockworkMod.zip file from there.
• In the Odin, click on ‘Start’ button in order to start the flashing of ClockworkMod recovery image on your Galaxy S3-I9300.
• When the flashing gets completed, your Galaxy S3 will reboot automatically.
• You can disconnect your Galaxy S3 from PC after the Samsung Logo gets appeared.
• To enter into the recovery mode, press Home and Volume Up buttons.

That’s it.  You have now successfully installed ClockworkMod Recovery (CWM) on Samsung Galaxy S3 GT-I9300. The process is very simple and I hope you will follow it properly. If you face problem in any step, then do let us know by your valuable comments in the comment section below.

Download and install AT & T Samsung Galaxy S3 Gets UCALH9 Based Software Update

 

So if you are an AT & T Galaxy S3 customer then grab the latest firmware on your device now by going through the Settings> About Device > Software Update and then finally tap on Check for Updates.