Download and install - Update Samsung Kies v2.5

 

Sync your Samsung Android device with your PC

New colorful update for KIES.

Its now very fast and no lag while loading…

The letters are small and very good UI.

Slight animation effect. well optimised.

DOWNLOAD

Install ClockworkMod Recovery (CWM) on Samsung Galaxy S3 GT-I9300

 

How to Install ClockworkMod Recovery (CWM) on Samsung Galaxy S3 GT-I9300

• The process may result in losing all of your data like apps, messages, contacts etc. So first of all take back up of all data to work risk-free.
• Uninstall the antivirus from device (if any).
• Don’t let the power of the device to create any problem for you. So keep your device charged at least 50 percent.
• Download the ClockworkMod from here.
• Download Odin v3.04 from here
• Extract Odin3_v3.04.zip
• Enter your Galaxy S3 into download mode by pressing the Volume Down + Power + Home buttons together.
• Now connect your Galaxy S3-I9300 to your computer by using USB cable.
• On successful attachment, you will see the “Added” message in Odin window.
• In Odin, click the PDA button and select the ClockworkMod.zip file from there.
• In the Odin, click on ‘Start’ button in order to start the flashing of ClockworkMod recovery image on your Galaxy S3-I9300.
• When the flashing gets completed, your Galaxy S3 will reboot automatically.
• You can disconnect your Galaxy S3 from PC after the Samsung Logo gets appeared.
• To enter into the recovery mode, press Home and Volume Up buttons.

That’s it.  You have now successfully installed ClockworkMod Recovery (CWM) on Samsung Galaxy S3 GT-I9300. The process is very simple and I hope you will follow it properly. If you face problem in any step, then do let us know by your valuable comments in the comment section below.

Download Official XXBLFB Android 4.0.4 ICS Firmware for galaxy s3 (manual installation)

 

If you have not received this ICS update via OTA yet now in your region, but still want to flash or install it up on your Galaxy S3, then here is guide  for you.

• Root & Install ClockworkMod Recovery on your Galaxy S3. You can also make use of CF-Root kernel package to do so quite easily.
• Download & Install all essential device drivers on your PC. You can also make use of Kies application to get that done with ease.
• Download Odin flashing tool from here – Download Link.
• Now, download the XXBLFB Android 4.0.4 ICS Firmware / ROM Package for your Galaxy S3 from here – Free Download.
• Extract the .zip files of the ROM and Odin.
• Now turn off your phone and then enter into download or flash mode by pressing & holding these buttons for a while - Volume Down + Home + Power and then press the Volume Up button when you see something on the screen of your device.
• Now connect your phone with the computer using a data cable.
• Now open up Odin on your computer and then click on the ‘PDA’ option.
• After that, just select this file - I9300XXBLFB_I9300OXABLFB_I9300XXLFB_HOME.tar.md5 from the extracted directory of the .zip file of the XXBLFB ICS ROM.
• Now, click on the ‘Start’ button from the application window of Odin.
• Disconnect your phone from the computer once the firmware is completely installed & the Samsung logo have appeared on the screen of your Samsung Galaxy S3.
• Now turn off your phone and then enter into recovery mode by pressing and holding these buttons for a while - Volume Up + Home + Power.
• Select – Wipe Data/Factory Reset and then Wipe Dalvik Cache.
• Now go back by selecting – ++++ Go Back ++++ and then select - Reboot System Now to restart your device.

Oh yeah, this official XXBLFB Android 4.0.4 Ice Cream Sandwich (ICS) Firmware or ROM has now been successfully installed on your Samsung Galaxy S3 GT-I9300. You are are now ready to use this latest stock ICS ROM on your Galaxy S III with some advanced features, changes and modifications. Please share your views about this ROM with us through leaving a comment on this entry or post just below

Root Samsung Galaxy S2 GT I9100 on XXLQ5 ICS 4.0.4 Firmware

How to Root Samsung Galaxy S2 GT I9100 on XXLQ5 ICS 4.0.4 Firmware

Procedure to Root Samsung Galaxy S2 GT I9100 on XXLQ5 ICS 4.0.4 update:

• Download XXLQ5 ICS 4.0.4 Rooting Package & Odin from here to your computer. Once you download, you need to extract the same and open Odin in your computer.

• Turn Off your phone so that it can be entered in the Download mode. Download mode in Galaxy S2 GT I9100 can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which you will get to see a green robot indicating that the device has entered in the download mode.

• Connect your phone to computer with the help of original USB cable and then you will see that the ID : COM section in odin turning yellow.

Note: If the ID : COM section doesn’t turn Yellow, you need to check with two things which are mentioned below,

• Install the USB Drivers in your computer &
• Go to the Path “Settings > Wireless & Network > USB Settings” and ensure that “Samsung KIES” option is ticked before connecting the phone to the computer.

• Click on “PDA” to select “CF-Root-SGS2_XX_XEN_LQ5-v5.4-CWM5” and click on “Start” to start the process of rooting. As soon as it’s completed, the device will be rebooted. The whole process of rooting will take around 2 – 3 minutes.

• You can check whether the device has been rooted or not with the help of “Root Checker” application which can be downloaded from the Google PLAY Store.

Note: Just in a rare case if the device is not updated and it gets into the boot loop mode, you need to again clear the cache from the recovery mode and retry the whole process from the start.

So there you go, you have now successfully rooted your Galaxy S II GT I9100 on the latest ICS 4.0.4 firmware. Do let us know if you face any issues in the process of applying this firmware update.

Enable USB Mass Storage Option in Samsung Galaxy S3

How to Enable USB Mass Storage Option in Samsung Galaxy S3 – Tutorial

With Jellybean 4.1 nearing its roll out on the latest SAMSUNG Galaxy S III GT I9300 device, it seems like most of the users are disappointed with one of the feature which doesn’t find place in the device. Yes you have caught it right, it’s the USB Mass Storage Mode (UMS). So, to keep things simple, we will be guiding you in the due course of this article on how you can easily infuse this option in your next generation Galaxy S III. In place of UMS option, users will have to make use of MTP which is also called as Media Transfer Protocol.

There are their own advantages of both these modes, but then for most of the users it’s like compatibility versus the preference. One of the major drawbacks is that not all the operating systems are compatible with the MTP and without the third party tools, things can only get messed up. All thanks to the XDA developer which has come up with this standalone application which can be applied to all the phones of Samsung Galaxy S3. So, for all those who wanted to get rid of the instructions of MTP, can proceed to follow the instructions mentioned in this tutorial.

Warranty Information: Warranty will be intact since it’s not a compulsion that the device has to be rooted.

Though there is a very less probability that the data in the device may get lost. So, it’s highly recommended to back up all the data present in your device. Ensure that all the data in the device is backed up only with the help of below steps. Don’t use KIES to back up the data.

SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Call Log -Call Log and Restore
Images, Songs, Videos, Files – Copy to internal / External SD Card,
APN and MMS Settings – Note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”

So, let’s head to the procedure below on how to infuse in the option of USB Mass Storage Mode (UMS) in your Samsung Galaxy S III GT I9300 smartphone.

Procedure to Enable USB Mass Storage Mode (UMS) in Samsung Galaxy S3:

• Download the USB Mass Storage (UMS) APK file from here to your computer and connect your phone to computer with the help of USB cable to copy this APK file in your device.

• Disconnect and navigate to the APK file which you placed in the device to open and install the same. Follow all the on screen instructions so as to install this application in your device.

• Once it’s installed successfully, open the same and select any option as mentioned in the screen capture below.

Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go, you have successfully installed the USB Mass Storage Mode (UMS) capability in Samsung Galaxy S3 with the help of an all new application.

How to Root Samsung Galaxy S3 with CF-Root 6.1 (Chainfire root) ?

Step by Step Tutorial

 

• Download Odin application on your PC and extract the downloaded .zip file using any extraction tool so as to be able to use it straight away.
• Now download CF-Root 6.1 onto your computer and extract the downloaded .zip file to get the main rooting file.
• Now turn on USB debugging on your Galaxy S3 from here – Settings > Applications > Development > USB Debugging.
• Once you are done with that, boot into download mode on your Galaxy S3 by pressing these buttons – Volume Down Button + Home Button + Power Button.
• Now connect your device with the computer with your device’s USB data cable.
• Now open Odin on your computer and click on the “PDA” button available within the home window of the application.
• Open up the folder in which you had extracted the rooting package and select the file having .TAR extension.
• Now click on the “Start” button to root your device and install SuperSU, CWM 5.5 & CWM Manager on your Galaxy S3.
• After that, turn off your Galaxy S3 and enter into Recovery Mode by pressing these buttons - Volume Up Button + Center Button + Power Button and wipe your cache partition from – “ Wipe Data/Factory Reset > Wipe Cache Partition ”.
• Now select “+++ Go Back +++” and then select “Reboot System Now”.

That’s all, you have now successfully rooted your Samsung Galaxy S3. After restarting your phone, you will see SuperSU, CWM Recovery 5.5, CWM Manager installed on your phone. If you are having any problem while following the above mentioned procedures, then just hit us up in the comments’ section, we will try our best to help you out.

How to Root Samsung Galaxy S III GT-I9300 ?

Samsung Galaxy S3 is the latest Android smartphone and was one of the most awaited Android device which had been released away just recently. Yes, this all new smartphone from Samsung can now be rooted with just a few easy steps, special thanks to ChainFire for the rooting package. So, if you want to root your Galaxy S3, then here are the pre-requisites & installation procedures :

Pre-Requisites & Initial Tasks

• Turn off your device’s antivirus and firewall before going to the installation process.
• Make sure you have at least 70% of battery backup on your device.
• Turn on USB Debugging from – “ Settings > Applications > Development > USB debugging ” !
• Backup your files, messages, settings, calling logs & contacts before getting ahead to the installation process.

How to Root Samsung Galaxy S III GT-I9300 ?

• Download Odin for your computer from this link – “ Download Now “ and extract it using any extraction tool.
• Now download the Galaxy S3 rooting package onto your computer from this link – ”Download Now ” and extract it to achieve the rooting file.
• Once you are done with that, boot into download mode on your Galaxy S3 by pressing – “ Volume Down Button + Home Button + Power Button ” and connect it with your computer using a USB data cable.
• Now open Odin on your computer and click on the “PDA” button available within the home window of the application.
• Open up the folder in which you had extracted the rooting package and select the file with .TAR extension.
• Now click on the “Start” button which will install the rooting package on your Galaxy S III and once it gets installed, remove your device from the computer.
• After that, turn off your Galaxy S3 and enter into Recovery Mode by pressing – “ Volume Up Button + Center Button + Power Button ” and wipe your cache partition from – “ Wipe Data/Factory Reset > Wipe Cache Partition ”.
• Now go back and tap on the “Reboot System Now” button, which will restart your device and you should find your device in a rooted state.

That’s all, you have successfully rooted your Samsung Galaxy S III GT-I9300. If the ID : COM section of Odin didn’t turn into yellow even after connecting your device properly with the computer, then you will need to download device’s USB drivers & Samsung Kies application on your computer. And if you are having any further question or had faced any issue while following the above mentioned steps, then just do let us know in the comments’ section of this article

Spoof unlimited on Bada 2.0

Flash the following files according to your Phone model

* Just full flash apps_Compressed.bin (list from below)

*Just Tick LSI, Boot Change and Full Download

*Then Click Port Search.

* Then Download

Multiloader 5.67:      Download link

For Wave I

download 

Or

download

For Wave I Turko V5 

Download 

Or

http://www.mediafire.com/download.php?sdxik7ua26twn4f

For Wave II

download

Or

http://www.mediafire.com/download.php?y4x1pz6s3i2qkn5

For Wave III: Caution Not tested! 

download 

Or

http://www.mediafire.com/download.php?536yvbd0d1km4a5

For 723 Wave Firmware EXXLB3 

Download

Or

http://www.mediafire.com/download.php?34z604sot4qucw2

NOTE : This method may not work for all firmwares So i recommend that 

 if you got error when you spoof: “0101,0102,0103,0104,0105,0106,0107,0108,0109,0110?

* For wave I : Just flash your wave to turko v5 by hero533 and then do the first step of flashing the apps_Compressed.bin. 

* For wave II : Just flash this new custom Firmware based on DDLC2 (Download link given below) and i added some modification from turko v5 to it.This firmware solve the error problem and you can run many spoofed apps (no need to do step one with this firmware )Download link                          

Download  software:

Updated !

Download

After that, Follow the following instructions :

1/Plug your phone in Mass Storage mode

when you click on “Signer” there will apear “SIGNITURE(2)” You must delete “signiture” and rename “signiture(2)” to “signiture” and everything ok ))))))) No erros

and then you can continue

2/Extract the application you want to install

3/Select the executable of the application

4/Check box and click on “Signer”

5/Click on “Renommer”

6/Go to the “Copie” tab, select the letter of the memory card and click on “Copier”

7/At the end, a message appears, unplug your phone, go to
Parameters-> General-> Install location and select Memory Card, then plug the phone in Samsung Kies mode

8/Go to the “Installation” tab, select “Carte Mémoire” and click on “Installer”

9/At the end, a message appears, you can enjoy your application !

SAMSUNG Galaxy S III I9300 TOOLKIT V1.0

Drivers, Backup, Root, CWM, BusyBox + MORE for samsung galaxy s3
INTRODUCING THE SAMSUNG GALAXY S3 TOOLKIT

FUNCTIONS OF  TOOLKIT Version 1.0

• Install drivers automatically
• Backup/Restore a single package or all apps, user data and Internal Storage
• Backup your /data/media (virtual SD Card) to your PC for a Full Safe backup of data
• Perform a FULL NANDROID Backup of your system via adb and save in Custom Recovery format on your PC
• Pull /data and /system folders, compress to a .tar file and save to your PC
• Backup/Restore your /efs partition
• Dump selected Phone Partitions, compress to a .zip file with md5 and save to your PC
• Install BusyBox binary on phone
• Root any public build (different options available)
• Flash Stock Recovery or CWM Recovery
• Flash Insecure Boot Image for adb mode
• Install a single apk or multiple apk's to your phone
• Push Files from your PC to your phone
• Pull Files from your phone to your PC
• Set Files Permissions on your phone
• Dump selected LogCat buffers to your PC
• Dump BugReport to your PC (if installed)
• Help, Information Screen for various tasks
• Reboot Phone options in adb mode
• Change background, text colour in ToolKit
•  
•  Beguile memorialize this ıs the 1st let go and there may be some errors. Explosion anything you happen or come on or upon so I can stick them asap.
  
  note: As the ToolKit.exe case ısn't Digitally Signed with a Microsoft Certificate ıt 'may' win picked up as potentially baneful by Antivirus Programs and deleted on unexcelled administrate. If this happens recover the dossier and rule out ıt from days or time to come scans to practice ıt.
• Download 
•  
• 1. INSTALLING GALAXY S3 DRIVERS
  
  The first thing you need to do is to install the drivers. These are needed so that you can communicate with the phone via the PC and perform the tasks that the ToolKit offers.
  
  a. Make sure your phone is booted into Android and the USB cable is unplugged.
  
  b. Select Option 1 in the ToolKit to install the Samsung USB Driver pack. This should install all the neccessary drivers you need.
  
  c. After the drivers have been installed connect the USB cable and the PC should detect the phone and install the correct drivers. This will also happen when you enter Download Mode and Recovery Mode for the first time.
  
  d. If you want to check the drivers then go to your Control Panel on your PC and open the Device Manager. With the USB cable connected you should see a device listed as 'Samsung Android Phone' or something similar and a driver attached to it.
  
  
  
  2. USING MSKIPS' SAMSUNG GALAXY S3 TOOLKIT V1.0
  
  a. Download the Samsung Galaxy S3 ToolKit package and run to install the ToolKit to your PC. The installation will also create a Shortcut on your desktop for easy access. You have the option to include or exclude the drivers files at installation so if you already have your drivers set up and are just updating the ToolKit then you can untick the drivers if you wish.
  
  b. Once the ToolKit is installed make sure your phone is booted and plugged in via USB cable and double click on the 'Samsung GS3 ToolKit v1.0' shortcut on your desktop to run it.
  
  c. When you enter the Main Menu you will see 'Adb Mode' at the top. If you have installed your drivers correctly then you will see your phones serial number under the text. If you see this then your device is connected and you can carry on.
  
  d. Each option has full information on what it is and how to use it.
  
  
  3. FLASHING A ROM, RADIO OR KERNEL VIA CWM RECOVERY
  
  a. Download your chosen Rom, Radio or Kernel from the Development Forum, then make sure your phone is booted up as normal and connect your usb cable so it goes into MTP Mode. Copy the .zip file (DO NOT UNZIP IT FIRST) to the 'Internal Storage' part on your phone. Do not copy it to a Sub Directory as it will be harder to find when flashing it.
  
  b. Enter CWM Recovery (shut down the phone then hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds).
  
  c. Scroll down to 'Install zip from sdcard' and select using the HOME button. Then select 'choose zip from sdcard' if the file is on the external Memory Card or 'choose zip from internal sdcard' if the file is on Internal Memory.
  
  d. Scroll to your zip file and select. Then scroll down to 'Yes' in the list and select to start flashing.
  
  e. When flashing is finished press the BACK Button to go back until you get to the Main Menu and then select 'reboot system now' to reboot your phone into Android.
  
  
  4. FLASHING A ROM, RADIO OR KERNEL VIA DOWNLOAD MODE USING ODIN
  
  Odin can be used to flash image files or parts of your phone. You can flash something as simple as a boot image or a complete system. Everything is packed in a tar or tar.md5 file on your PC and flashed via Odin which is a Windows OS program.
  
  a. Make sure you have your tar file stored on your PC.
  
  b. Reboot your phone to Download Mode [shut down your phone, then hold down the Home + Volume DOWN Buttons and press the Power Button for about 2 seconds until a Warning screen appears. Press Volume UP to continue to Download Mode.
  
  c. Connect your phone via usb and the first box at the top under ID:COM should turn blue and have some text in it. If you are using Download Mode on your phone for the first time then you will notice drivers being installed to use it.
  
  d. The site or page you downloaded the file from will usually give you instructions to set Odin but if not you want to load boot/recovery/system files to the PDA location and have 'Auto Reboot' and 'F.Reset Time' ticked and nothing else.
  
  e. Click on 'Start' to start the flash. You can see what is happening in the text box in the lower left.
  
    INFORMATION
  
  How to get into Recovery Mode
  1. Unplug the USB cable.
  2. Shut down the phone.
  3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.
  
  How to get into Download Mode For Odin
  1. Unplug the USB cable.
  2. Shut down the phone.
  3. Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
•  source: xda-developers by mskip