Clock 68 widget for bada - wave

 

Clock 68 widget for bada - wave

This widget is supported on the following Samsung phones:

• Wave 525 (Bada 1.0)
• Wave 533 (Bada 1.0)
• Wave 575 (Bada 1.0)
• Wave 578 (Bada 1.0)
• Wave 723 (Bada 1.0)
• Wave II (Bada 1.0)
• Wave S8500 (Bada 1.0)
• S5380 Wave Y (Bada 2.0)
• S7250 Wave M (Bada 2.0)
• Wave 525 (Bada 2.0)
• Wave 533 (Bada 2.0)
• Wave 575 (Bada 2.0)
• Wave 578 (Bada 2.0)
• Wave 723 (Bada 2.0)
• Wave II (Bada 2.0)
• Wave III (Bada 2.0)
• Wave S8500 (Bada 2.0)

Download widget

Download and Update Galaxy S3 I9300 with Clockwork Mod Touch Recovery 6.0.1.2

 

• Ensure that the minimum charge left in your phone is not less than 30%. Navigate to the path “Settings > Applications > Development > USB debugging”, enable the USB Debugging. All the antivirus tools should be turned off as these tools tend to interrupt the process of firmware update.

• To check on whether your device is rooted or not, you will have to download the “Root Checker” app from the Google PLAY Store.

So assuming that you are done with all the above mentioned instructions, you can now head over to the next step where we have summed up a detailed guide on how to apply with this custom recovery image.

Procedure to Install Custom Recovery Image in Samsung Galaxy S3 I9300:

• Download the Latest Clockwork Mod Touch Recovery 6.0.1.2 Image and Odin from here to your computer and connect your phone to the compute with the help of original USB cable and place this recovery file in your external SD Card and not in the internal memory.

• Disconnect the phone and turn off the device so that it can be entered in the download mod. Download mode in your Galaxy S3 GT I9300 device can be entered by holding the Volume Down button + the Home key button (the middle button). If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode.

• Now, open odin in your computer and connect your phone in the download mode. Once you connect the device, the ID : COM section in odin becomes Blue indicating that the required drivers have been installed and then click on “PDA” to select “CF-Root-SGS3-v6.4.tar” file. After selecting the file, click on “Start” to start the process of custom recovery installation.

• You will see a progress bar which will indicate the progress of the custom recovery installation with minutes in Odin. Once the device is restarted and the home screen is shown in your phone, you can disconnect the phone connected from computer.

Note: Just in a rare case if your Samsung Galaxy S III refuses to turn ON or say if it gets stuck on the Samsung Galaxy Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from the start.

So there you go, you have now successfully flashed the latest Clockwork Mod Touch Recovery 6.0.1.2 Image in your Galaxy S3 smartphone. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Root Galaxy S3 GT I9300 on XXDLIB Jellybean 4.1.1 Firmware

 

Procedure to Root Samsung Galaxy S3 I9300 on XXDLIB 4.1.1 Firmware:

• Download the XXDLIB 4.1.1 Rooting Package and Odin from here to your computer. Once downloaded, turn off your phone so that you can then enter your phone in the download mode.

• Extract the Odin zip to get Odin executable file and XXDLIB Rooting Package to get the tar file. Open Odin in your computer and turn off your phone so that it can be entered in the download mode.

• Download Mode in Galaxy S3 can be entered by pressing the Volume Down rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode. You can alternatively, enter your phone in the download mode with the help of below mentioned Video tutorial.

• Click on “PDA” to select “CF-Root-SGS3-v6.4.tar” and then click on “Start”. Once you click on start, it will take around 2 – 3 minutes for rooting the device.

• As soon as the device is rooted, the device will be rebooted. Once you see the home screen, you will have to disconnect the device from the computer.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

So there you go you have now successfully rooted your device. To check on whether your device is rooted or not, you will have to download the “Root Checker” app from the Google PLAY Store. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Download and install - Update Galaxy Note N7000 with Jellybean 4.1.1 based AOKP 4 Firmware

 

Procedure to Update Galaxy NOTE N7000 with AOKP 4 Firmware Version:

• Download the Root Checker app from the Google PLAY Store and check whether the device is rooted or not. If the device is not rooted, then with the help of below steps, you will have to root the same for which we will soon be coming out with an article.

• Now, up next download the ROM Manager app from the Google PLAY Store. Ensure that you are not creating the backup with the help of ROM Manager as it may brick the device completely.

• Download the AOKP Firmware package from here to your computer. Once downloaded, connect your Galaxy Note to computer with the help of original USB cable and place the downloaded zip file in your phone.

• Disconnect the phone, turn off your Galaxy Note N7000 and hold the Volume Up button + the Home key button (the middle button) and while holding these both keys, press the Power button for turning the device ON in the recovery mode.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. Also, select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware.

• Up next,  select “install zip from sd card” > “choose zip from sd card” and then choose the AOKP 4 Custom ROM firmware Package & Google Apps package which you have placed in your Galaxy S2.

• It will take around 4 -5 minutes for applying this update. Once the device is updated, the device will land up in the recovery mode screen. Select “Go Back” and select “Reboot system now” for rebooting the device in the normal mode.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Congratulations, you have now successfully applied the latest firmware of AOKP build in your Galaxy Note N7000 smartphone. Do let us know in the comments section below just in case if you face any issues.

Download and install - Update Sprint Galaxy S3 SPH L710 with Jellybean 4.1.1 Firmware

 

How to Update Sprint Galaxy S3 SPH L710 with Jellybean 4.1.1 Firmware

Procedure to Update Samsung Galaxy S3 SPH L710 with Jellybean 4.1.1 Firmware:

• Download Firmware Package from here to your computer.
• Odex
  SPRINT JELLY BEAN LEAK
  MD5: 45BA4316C4A32788194C0B04ED7E5BFC
  
  DeOdex
  SPRINT JELLY BEAN LEAK
  MD5: 4B571B05D41D2F589BAFF84E27C0DD3F
  
  LIF Firmware:
  LIF Firmware/modem/baseband update
  
  Changelog:
  9/30/12:
  -Added Jelly Bean boot animation
  -Modified kernel to adb shell @ root, bootanimation support, and a few other tweaks.
  -Fixed root. 
•  Once you have downloaded in your computer, place the same in the external micro SD Card of your Galaxy S3 smartphone.

• Disconnect the device from computer and turn off your computer so that you can then enter your phone in the recovery mode. Recovery mode can be entered by pressing the Volume Up rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode.
• In recovery mode, select “install zip from sd card” > “choose zip from internal sd card” and then choose the Jellybean firmware Package which you have placed in your phone. Once it’s selected, it will take around 4 -5 minutes for applying the update. Also, note that it may take longer time than the normal time for the first reboot.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

To check on whether the firmware has been successfully applied or not, all you need to do is to just head over to the path “Settings > About Phone” where in you can check the same on the firmware has been updated or not where you will get the firmware version as Jellybean 4.1.1 update.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Very soon there will be many more Jellybean 4.1.1 firmwares which will be rolled out which too will be covered here.

•  xda

Download and install - Update Galaxy S GT I9000 with Amestris Dark Cyan V12 Custom ROM Firmware

 

   

 

Procedure to Update Galaxy S GT I9000 with Amestris Dark Cyan V12 Rev.01 JW8 Firmware:

• Download the Amestris Dark Cyan V12 Rev.01 JW8 Firmware Package (Alternate Link) from here to your computer. Once downloaded, connect your phone to the computer using the original USB cable and place the same in your device.

• Once placing the file, disconnect the phone and turn off the phone so that it can be entered in the recovery mode. Samsung Galaxy S GT I9000 can be entered in the recovery mode by pressing the Volume Up Key, Center button, and holding both simultaneously press the Power Button.

• In recovery mode, select Wipe data/factory reset and also you need to select Wipe Cache partition which will clear out all the cache data present in your device, if you skip this step then you may face issues like force close issues in your Galaxy S.

• Select “install zip from sd card” > “choose zip from sd card” and then choose the Amestris Dark Cyan V12 Rev.01 JW8 Firmware Package to select “Yes” with the help of Volume rocker keys and Menu button. Once the file is selected, it will take around 5 – 7 minutes for applying the same. Once the update is applied, select “go back” and then “reboot system now”. You can see the progress bar which will indicate the firmware upgrade progress.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Please be informed that it will take more than expected time for rebooting the device. Once you see the home screen, you can head over to the path “Settings > About Phone” where in you can see all the details about the new firmware.

Congratulations, do let us know if you came across any issues in the process of firmware update as we will try our level best to sort out the same.

Download and install - Update Galaxy Tab 8.9 with Jellybean 4.1.1 based AOKP Firmware

 

How to Update Galaxy Tab 8.9 with Jellybean 4.1.1 based AOKP Firmware

Procedure to Update Samsung Galaxy Tab 8.9 i957 tablet with Jellybean 4.1.1 based AOKP firmware:

• Download Jellybean 4.1.1 based firmware and Google Apps Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the same in your tablet.

• Now, disconnect the tablet connected from computer and turn off the device so that it can be entered in the recovery mode. You can also enter the device in the recovery mode from the ROM Manager app which can be downloaded from the Google PLAY Store.

• In recovery mode, select “install zip from sd card” > “choose zip from sd card” and then choose the placed Unofficial jellybean 4.1.1 based AOKP Firmware package and Google Apps. Once the files are selected, it will take around 4 – 5minutes for applying the firmware update which can be tracked with the help of the progress bar.

• After this from the recovery mode, you need to select“++++ Go Back ++++” > “reboot system now” to reboot the phone. Please note that it will take more than normal time for booting the device after the firmware is applied. If you are getting any force close errors, then from the recovery mode, clear all the cache from the device as these files create the force close issues.

Note: Just in a rare case if your Samsung Tab refuses to turn ON or say if it gets stuck on the Samsung Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from the start.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully applied the firmware update of Jellybean 4.1 based AOKP in your Galaxy Tab 8.9 device.