Download and install - Update Galaxy ACE S5830 with Jellybean Styled Revolution Light Custom ROM

 

Procedure to Update Samsung Galaxy ACE S5830 with Revolution Light Custom ROM Firmware:

• Download the Revolution Custom ROM Firmware package from here to your computer. Once downloaded connect your device to the computer with the help of original USB cable and place the downloaded zip file in the internal memory of your device.

• Now, disconnect the device from computer and download the ROM Manager app from the Google PLAY Store. Open ROM Manager app and select the option of “FLASH Clock Work mod Recovery” so that the custom recovery image is flashed. Up next select “Reboot in Recovery Mode” for entering the device in the recovery mode.

• Once the device boots in the recovery mode, select “install zip from sd card” > “choose zip from sd card” and select the Revolution Light Custom ROM Firmware which you have placed in your device.

• Please note that once the file is selected, it will take around 4 – 5 minutes for applying this update and once it’s placed, you will need to select “Go Back” and “reboot system now” for rebooting the device in the normal mode. It may take more than 6 – 7 minutes for booting the device sometimes, make sure that you are not interrupting while the device shows the Galaxy ACE Logo boot animation.

Tip: If your Galaxy ACE doesn’t power up or say it gets into the boot loop mode, you need to re insert the battery and then re try the process of firmware update by following the above steps.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully learnt on how to update your Galaxy ACE S5830 with the latest Revolution Light Custom ROM Firmware.

Download and install - Update Galaxy S I9000 with Paranoid Jellybean 4.1 Custom ROM Firmware

 

Procedure to Update Galaxy S GT I9000 with Paranoid custom ROM Firmware:

• Download the Paranoid Custom ROM Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the Paranoid Custom ROM Firmware Package in your device.

• Disconnect the device from computer and turn off your Galaxy S GT I9000 so that it can be entered in the recovery mode. Recovery mode in Galaxy S GT I9000 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Now in the recovery mode, select “install zip from sd card” > “choose zip from internal sd card” and then choose the Paranoid Custom ROM Firmware Package which you have placed in your phone. It will take around 4 -5 minutes for applying the update.

• As soon as the update is applied select “Go Back” and select “reboot system now” for rebooting the device. Please note that it may take longer than expected time for rebooting the device since it’s a first time the device is being booted up after firmware installation.

• To check on whether firmware has been updated successfully or not, head over to the path “Settings > About Phone” where you will get to see the firmware version as “Paranoid Custom ROM Firmware” based on the latest Jellybean 4.1.2 firmware.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Samsung Galaxy S GT I9000 with the latest firmware of Paranoid version.

Download and install - Update Galaxy S PLUS GT I9001 with Official Value Pack Gingerbread 2.3.6 XXKQD Firmware

 

Procedure to Update Galaxy S PLUS GT I9001 with Value Pack Gingerbread 2.3.6 XXKQD firmware:

• Download Odin and Value Pack Gingerbread 2.3.6 XXKQD firmware Package from here to your computer. Once downloaded, extract both the zip files and open Odin in your computer.

• Turn Off your phone so that it can be entered in the download mode. Download Mode in Galaxy S PLUS GT I9001 can be entered by pressing the Volume Down rocker key + power button at the same time while the device is turned Off.

• If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode. Connect your device to the computer with the help of original USB cable which you got with the phone and once you connect it will install all the required drivers and then the ID : COM section will turn Yellow which will indicate that all the drivers are installed and you are ready to proceed to the next step.

• Click on “PDA” to select “I9001XXKQD_I9001ODDKP5_I9001DDKP9_HOME.tar.md5” and simple click on “Start” to start the process of firmware update. It will take around 4 -5 minutes for applying the update, once the firmware is updated, the Galaxy S PLUS GT I9001 will reboot automatically. Once you see the home screen, disconnect the device and configure the prompted settings.

• You may now be prompted to enter the Google Account details and Country selector with the Language preference, make sure that you have an active data connection.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. To check on whether the firmware has been updated or not, tap on Menu Key > Settings > About Phone where you will get to see the firmware version as Value Pack Gingerbread 2.3.6 XXKQD firmware.

Download and install - Update Galaxy S GT I9000 with Jellybean 4.1.2 Codename Android Firmware

 

Procedure to update Galaxy S I9000 with Codename Android 4.1.2 Firmware:

• Download the Google Apps Package and Codename Android 4.1.2 Firmware from here to your computer. Once downloaded, connect your device to the computer and place these two zip files in your internal SD Card. Ensure that you are not placing the file deep into the sub folders.

• Disconnect the device and turn off your phone so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S GT I9000 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Now, in the recovery mode, select “install zip from sd card” > “choose zip from internal sd card” and then choose the Codename Android Custom ROM Firmware and Google Apps Package. It will take around 4 -5 minutes for applying the update.

• Once you see the “install from sd card complete” message on screen, select “Go Back” and select “reboot system now” for rebooting the device in the normal mode. To check whether the firmware is updated or not, head over to the path “Settings > About Phone” where you will find the current firmware version.

Note: just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Alternatively, you can also head over to the source witht he help of below mentioned link.

Download and install - Update Galaxy R I9103 with CM 10 Jellybean 4.1.2 Firmware

 

Procedure to Update Galaxy R I9103 with CM 10 Jellybean 4.1.2 based Firmware:

• Download the CM 10 Jellybean 4.1.2 firmware package and Google Apps Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the two downloaded zip files in your Galaxy R, ensure that you are not placing the file deep into the device as it may not get detected in the recovery mode.

• Turn Off your Samsung Galaxy R I9103 so that it can be entered in the Recovery mode. The recovery mode can be entered by “Pressing Volume Up key+ Menu Key + Power ON the device”. Once you enter into the recovery mode, you need to select “Wipe data/factory reset” & “Wipe Cache partition” so that this will clear the cache in your device.

• In recovery mode, select “install zip from sd card” > “choose zip from sd card” after which you need to select the CM 10 Firmware Package which you have placed in your device and then select the Google Apps Package. Please note that once the files are selected, it will take around 5 -6 minutes for applying the update.

• Once the update is applied successfully, select “go back” and “reboot system now” for rebooting the device in the normal mode. Please note that it may take longer time than expected for rebooting the device as it’s the first time the device is being rebooted after updating the firmware.

Note: If your Galaxy R refuses to boot or gets in the boot loop mode, you need to re insert the battery and turn ON the device normally. You can also re apply the update by following the above mentioned steps.

Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go, you have now successfully learnt on how to apply with the latest unofficial Cyanogen Mod 10 Firmware in your Galaxy R I9103 which ropes in the goodness of Jellybean 4.1.2 firmware.

Download and install - Update samsung Galaxy S 4G with Paranoid Custom ROM Firmware

 

Procedure to Update Samsung Galaxy S 4G with latest Paranoid tablet based custom ROM firmware:

• Download the Paranoid tablet based custom ROM firmware package and Google Apps Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable.

• Place the zip files in your phone, ensure that you are not placing the file deep into the device as it may not get detected in the recovery mode. After placing the file, disconnect the phone from computer and turn off the same so that it can be entered in the recovery mode.

• Hold the Volume Up button + the Home key button (the middle button) and while holding these both keys, press the Power button for turning the device ON in the recovery mode in your Samsung Galaxy S 4G .

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition” and then select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware. Now, in the recovery mode, select “install zip from sd card” > “choose zip from sd card” and then choose the paranoid Custom ROM Firmware package and Google Apps Package which you have placed in the device. Once selected, it will take round about 4 – 5 minutes for applying the update.

• Once the update is applied successfully, you will now need to select “go back” and select the option of reboot system now. Once the device is booted successfully, you can see that the device is updated with this latest paranoid custom rom firmware.

Note: If at all your Samsung Galaxy S 4G gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So, there you go you have now successfully learnt on how you can apply this Paranoid custom ROM firmware which is very high on the features list.

Download and install - Update Galaxy S3 I9300 with Capon Mod Jellybean 4.1.2 Custom ROM Firmware

 

Procedure to Update Galaxy S3 GT I9300 with Jellybean 4.1.2 firmware based Capon ROM:

• Download the Capon ROM firmware zip Package from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB cable and place this zip file in your device’s external SD Card.

• Now, disconnect the Galaxy S3 connected to your computer and turn Off your device so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” to select the Capon ROM Custom ROM Firmware Package which you have placed in your device. Once selected, it will take around 4 – 7 minutes for applying the update. As soon as the update is applied successfully, select “go back” and “reboot system now” for rebooting the device in the normal mode.

• For your phone to show the home screen, it might take longer than expected time as it is the first time after installing the firmware update.

• Once the update is applied, select the option of “Go Back” and “Reboot System now” for rebooting the device in the normal mode. Since it’s a first reboot, it will take more time than the normal mode as it has to finalize all the apps etc.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Samsung Galaxy S3 GT I9300 with the Capon Mod custom ROM.