Download and install - Update Samsung Galaxy Nexus – Steps to Manual Update with Factory Jellybean 4.1.2 JZO54K Firmware

 

Procedure to Manual Update Galaxy Nexus with Stock Jellybean 4.1.2 Firmware:

• Download the Galaxy Nexus with Stock Jellybean 4.1.2 Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip file in the internal memory of your device.

• Once placed the file, you need to open the Command prompt in your computer to enter the command as mentioned below,

Adb devices
Adb reboot bootloader

• Now, press Volume Up button to see the option of “Recovery Mode” and then press the power button to enter into the same. Alternatively, you can also enter your Nexus in the recovery mode by pressing the “Volume Up + Volume Down” button simultaneously and keeping holding these two buttons you need to press the power button. Ensure that you will have to turn off the device before performing the manual step of entering into recovery.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition” and then select “install zip from sd card”> “choose zip from internal sd card” to select the Jellybean 4.1.2 Firmware Package which you have placed in your device. Once the firmware is applied successfully, you will then get to see a message “install from sd card complete”. So, once the firmware is updated successfully select “go back” and choose the option of reboot system now.

• To check on whether the firmware has been updated or not, you need to check the same from the path “Settings > About Phone” where you will find the firmware version as Jellybean 4.1.2.

Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Very soon we will be coming out with a new article which will help you to update with the latest Jellybean 4.2 version of firmware. Stay tuned to Android Advices.

Download and install - Update Galaxy Note N7000 – Stylish Jellybean 4.1.2 Paranoid Firmware

 

Procedure to Update Galaxy Note N7000 with Paranoid custom ROM firmware:

• Download the 4.1.2 Paranoid Custom ROM Firmware Package and Google Apps Package from here to your computer. Once downloaded, connect your Galaxy Note N7000 with the help of original USB cable and place these two zip files in your Galaxy Note. Ensure that you are not placing the zip file deep into the sub folders.

• Once the zip file is placed, disconnect the device and download the “ROM Manager” app from the PLAY Store. Please note that you should not backup the data with this app as it may brick your Galaxy Note. Now, either with the help of ROM Manager app you can enter the device in the recovery mode or with the help of below mentioned manual step you can easily enter the device in the recovery mode.

• Hold the Volume Up button + the Home key button (the middle button) and while holding these both keys, press the Power button for turning the device ON in the recovery mode in your Galaxy Note.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. Also, select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware.

• Up next select “install zip from sd card” to select the placed paranoid custom ROM firmware and the Google Apps Package. Once the firmware is completed, the screen will read as “install from sd card complete” after which you need to select “go back” and then “reboot system now” for rebooting the device in the normal mode.

• To check on whether the Paranoid custom ROM firmware has been updated or not, you need to check the same from the path “Settings > About Phone” where you will find the firmware version as jellybean 4.1.2 and Paranoid.

Note: just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congrats you have successfully updated your device with the latest Paranoid custom ROM firmware, we will very soon be coming up with the Official Jellybean 4.1.2 firmware for Galaxy Note N7000, so stay tuned for more updates.

Download and install - Update Galaxy S I9000 with Jellybean 4.1.2 C-RoM Mix v5.0 Firmware

 

Procedure to Update Samsung Galaxy S GT I9000 with C-RoM Mix v5.0 firmware:

• Download the C-RoM Mix v5.0 firmware package from here to your computer. Once downloaded, connect your Galaxy S GT I9000 to the computer with the help of original USB cable and place the zip file into the sd card. Ensure that you are not placing the files deep into the sub folders.

• Recovery mode in Galaxy S GT I9000 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Now, in the recovery mode, select “install zip from sd card” > “choose zip from internal sd card” and then choose the C-RoM Mix v5.0 firmware  Package. It will take around 4 -5 minutes for applying the update.

• Once you see the “install from sd card complete” message on screen, select “Go Back” and select “reboot system now” for rebooting the device in the normal mode.

• To check on whether the C-RoM Mix v5.0 firmware has been updated or not, you need to check the same from the path “Settings > About Phone” where you will find the firmware version.

Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully learnt to update your Galaxy S with C-RoM Mix v5.0 firmware, in the coming days to come we will come with new custom Jellybean 4.2 firmwares for Galaxy S devices.

Download and install - Update Verizon Wireless Galaxy S3 with ULE based Clean ROM Jellybean 4.1.1 Firmware

 

Procedure to Update VZW Galaxy S3 with Jellybean 4.1.1 Clean ROM Firmware:

• Download the VZW Galaxy S3 with Jellybean 4.1.1 Clean ROM Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip file in the external sd card.

• Disconnect the device and turn off the device so that it can be entered in the recovery mode. Recovery mode in Galaxy S2 GT I9100 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device. In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode.

• Alternatively, you can also enter the device into recovery mode with the help of ROM Manager app. Now, in recovery mode select “install zip from sd card” > “choose zip from internal sd card” and then choose the Android revolution custom ROM firmware Package

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

To check on whether the firmware has been successfully applied or not, all you need to do is to just head over to the path “Settings > About Phone” where in you can check the same on the firmware has been updated or not. Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Download and install - Update Galaxy S2 GT I9100 – Steps to Update with Jellybean 4.2 Custom ROM Firmware

 

Procedure to Update Jellybam 4.2 Update in GALAXY S2 GT I9100:

• Download the Jellybam 4.2 Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip file in your device.

• Once you have placed the file, disconnect the device and turn off your device so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S3 GT I9100 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode alternatively via the ROM Manager app which can be downloaded from the Google PLAY Store.

• Now, in the recovery mode, select “install zip from SD Card” to select the zip file of Jellybam which you have placed in your device’s SD Card. Once the file is selected, you now need to wait for the zip file to get processed in the device. As soon as you see the message of “installing from sd card completed” at the bottom of the screen, you now need select “go back” and then select “reboot system now” for rebooting the device in the normal mode. Device will take longer time than expected for rebooting the device.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. To check on whether the update has been successfully applied or not, you need to check the same from the path “Settings > About Phone” where you will find the current firmware version as Jellybean 4.1.2 firmware.

Download and install - Update Galaxy S3 I9300 with Capon Mod Jellybean 4.1.2 Custom ROM Firmware

 

Procedure to Update Galaxy S3 GT I9300 with Jellybean 4.1.2 firmware based Capon ROM:

• Download the Capon ROM firmware zip Package from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB cable and place this zip file in your device’s external SD Card.

• Now, disconnect the Galaxy S3 connected to your computer and turn Off your device so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” to select the Capon ROM Custom ROM Firmware Package which you have placed in your device. Once selected, it will take around 4 – 7 minutes for applying the update. As soon as the update is applied successfully, select “go back” and “reboot system now” for rebooting the device in the normal mode.

• For your phone to show the home screen, it might take longer than expected time as it is the first time after installing the firmware update.

• Once the update is applied, select the option of “Go Back” and “Reboot System now” for rebooting the device in the normal mode. Since it’s a first reboot, it will take more time than the normal mode as it has to finalize all the apps etc.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Samsung Galaxy S3 GT I9300 with the Capon Mod custom ROM.

Download and install - Update Galaxy ACE S5830 with Most Popular APOCALYPSE Custom ROM Firmware

 

• ICS-Style Settings Menu
• modded ICS Transparent Theme
• centered clock
• status bar supports transparency
• 50% trans-black lockscreen styles (sliding tabs, rotary, lens)
• bubble locksreen style by Team Carbon/Steel Blue Theme
• blue lockscreen buttons by Team Carbon/Steel Blue Theme
• contacts list image by Team Carbon/Steel Blue Theme
• usb mount image by Team Carbon/Steel Blue Theme
• sansation font  

 Procedure to Update Galaxy ACE S5830 with APOCALYPSE Custom ROM Firmware:

• Download the APOCALYPSE firmware package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the downloaded zip file in your Galaxy ACE.

• Once you have placed the same, turn off the device so that it can be entered in the recovery mode. To enter Galaxy ACE S5830 in the recovery mode, download the ROM Manager app and select the option of “reboot into recovery mode”.

• Once the device boots in the recovery mode, select “install zip from sd card” > “choose zip from sd card” and select the APOCALYPSE Custom ROM Firmware package which you have placed in your device.

• Please note that once the file is selected, it will take around 4 – 5 minutes for applying this update and once it’s placed, you will need to select “Go Back”

Tip: If your Galaxy ACE doesn’t power up or say it gets into the boot loop mode, you need to re insert the battery and then re try the process of firmware update by following the above steps.

So there you go you have now successfully updated your device with the latest APOCALYPSE custom ROM firmware. Do share with us in the comments section below just in case if you face any issues as we will try our level best to sort out the same. To check whether your phone is updated or not, head to the path “Settings > About Phone” where you will get to see the firmware as APOCALYPSE.