Selasa, 18 September 2012

Download and install - Update Galaxy S3 I9300 with XXDLI7 Jellybean 4.1.1 Firmware Update

Procedure to Update Galaxy S3 with XXDLI7 Jellybean 4.1.1 Firmware:

Download XXDLI7 Firmware Package from here to your computer. Connect your phone to the computer with the help of original USB cable and place the zip file in your device’s memory card.

Disconnect the device once the file is copied in the computer and turn off the device so that it can be entered in the recovery mode. Recovery mode in Galaxy S III GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button).

In recovery mode, select “install zip from sd card” > “choose zip from sd card” and then choose the placed XXDLI7 Firmware Package. Once the file selection is over, the firmware will be applied within 10 minutes, you can see the progress of firmware update with the help of a progress bar.

As soon as the firmware is applied successfully, you will have to select “Go Back” to select the option of “reboot system now” for rebooting the device in the normal mode.

Note: Just in a rare case if your Samsung Galaxy S III refuses to turn ON or say if it gets stuck on the Samsung Galaxy S3 Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from the start.

If you get any force close errors, then turn off the device and enter the device in the recovery mode to select the options of clear cache and wipe data as it will clear out all the cache data which are responsible for force close errors.

To check now on whether the firmware has been updated or not, head over to the path “Settings > About Phone” and see whether it reads XXDLI7 firmware version 4.1.1 or not. Do let us know if you come across any issues in the process of applying the firmware update. So there you go, you have now successfully upgraded your Galaxy S3 with the latest Jellybean 4.1.1 firmware update.

Download and install - Update Galaxy S3 with Android Revolution HD Jellybean Custom ROM Firmware

Procedure to Update Galaxy S3 with Android revolution custom ROM firmware:

Download the Android revolution custom ROM firmware Package from here to your computer and place the same in the external micro SD Card of your Galaxy S3 smartphone.

If connected with the computer, disconnect the same and turn off your S3 so that it can be entered in the recovery mode.

Recovery mode in Galaxy S2 GT I9100 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device. In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

Select “install zip from sd card” > “choose zip from internal sd card” and then choose the Android revolution custom ROM firmware Package which you have placed in your phone. Once it’s selected, it will take around 4 -5 minutes for applying the update. Also, note that it may take longer time than the normal time for the first reboot.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.
To check on whether the firmware has been successfully applied or not, all you need to do is to just head over to the path “Settings > About Phone” where in you can check the same on the firmware has been updated or not.
Congratulations, do let us know if you face any issues faced in the process of applying the update as we will try to address the same as soon as possible.

Download and install Most Stable Jellybean 4.1.1 Firmware for Galaxy S GT I9000

Galaxy S GT I9000 – Steps to Install Most Stable Jellybean 4.1.1 Firmware

Procedure to update Galaxy S GT I9000 with the Latest Jellybean 4.1.1 Firmware Update:

Download Google Apps Package and Jellybean 4.1.1 Firmware package from here to your computer. Once downloaded, place these two zip files in your Galaxy S’s internal memory.

Disconnect the phone and simply turn off the device so that it can be entered in the recovery mode. Samsung Galaxy S can be entered in the recovery mode by pressing the Volume Up Key, Center button, and holding both simultaneously press the Power Button.

In recovery mode, select Wipe data/factory reset and also you need to select Wipe Cache partition which will clear out all the cache data present in your device, if you skip this step then you may face issues like force close issues in your phone.

Select “install zip from sd card” > “choose zip from sd card” and then choose the Jellybean 4.1.1 firmware package and then the Google Apps Package to select “Yes” with the help of Volume rocker keys and Menu button. Once the file is selected, it will take around 5 – 7 minutes for applying the same. Once the update is applied, select “go back” and then “reboot system now”.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section so that just in case if you face any issues faced in the process of applying this update as we will try our level best to sort out the same. Congratulations, you can check the firmware version from the path “Settings > About Phone”.

How to Root Nexus S – Android 2.3 Gingerbread with Bootloader

Procedure to root Nexus S mobile device:

First of all you will need to go to fast boot mode / boot loader mode which can be entered by holding Volume up key and power button.

Now, you will need to download recovery-clockwork-herring and need to transfer the same into the root of SD Card and need to boot into Clockwork recovery and then you will have to install the su-2.3.6.1-ef-signed file by downloading the same from here or it can also be downloaded from an all new Android Market place. This is it you have now successfully rooted your Nexus S mobile device.

So, just by following three simple steps you can easily root your Nexus S device.

Download and install Touch Based TWRP Recovery in Galaxy S Advance I9070

Procedure to Install TWRP based Touch Recovery in Galaxy S ADVANCE:

Download the TWRP based Touch Recovery for Galaxy S ADVANCE package and Odin Package in your computer. Extract the TWRP recovery package and Odin in your computer. Open Odin in your computer and turn off the device so that it can be entered in the Download mode.

Download Mode in Galaxy S ADVANCE I9070 can be entered by pressing the Volume Down + Power button till the device gets turned ON in the download mode. If the device gets turned ON in the normal mode, then you need to retry entering the device in the download mode.

Connect your Galaxy S ADVANCE I9070 with the computer using the Original USB cable while the Odin is opened in your computer. Once you connect the device to the computer, ID : COM section will turn Yellow which will indicate that all the drivers have been installed.

Click on “PDA” to select the “GT-I9070_GB_TWRP_KERNEL.tar.md5” and click on “Start” for starting the firmware update process. It will take around 3 – 4 minutes for applying the update. As soon as the device is updated successfully, it will be rebooted automatically. Please note that it may take more than 2 – 3 minutes for rebooting the device as it will be the first reboot. Once the phone is rebooted, disconnect the phone.

Note: Just in a rare case if your Galaxy S ADVANCE refuses to turn ON or say if it gets stuck on the Samsung Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from the start.

Once the device is updated with this recovery, you can check the same by entering the device in the recovery mode. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same as we will be more than happy to address the same. We will check out on how you can install the new custom ROM firmwares.

Download and install Update Galaxy SL I9003 with Jellybean 4.1.1 Codename 3.5.0 Firmware

How to Update Galaxy SL I9003 with Jellybean 4.1.1 Codename 3.5.0 Firmware

Procedure to Update Galaxy SL GT I9003 with Codename Android 3.5.0 Firmware:

Download the Codename Android 3.5.0 Firmware package & Google Apps from here to your computer. Once downloaded, connect your phone to computer and place these two zip files in your device. Ensure that you are not placing these files into the sub folders.

Disconnect the device and turn off the same so that it can be entered in the recovery mode. Press and hold the Volume Up + Home buttons together, and then press the Power button till you see the Green Android Robot along with the Recovery mode options list. If the device boots up in the normal mode, retry the process.

You can also boot the device in the recovery mode by selecting the appropriate option in the recovery mode. In recovery mode select “install zip from external SD Card” to find the placed “Codename Android 3.5.0 Firmware package” and also the “Google Apps”. Once it’s selected it will take around 4 -5 minutes for applying the same.

Once you see that the firmware has been applied successfully, select “go back” & “reboot system now” for rebooting the device in the normal mode. To check on whether the firmware has been applied or not, you can head over to the path “Settings > About Phone” which will show that the firmware has been applied successfully.

Note: Just in a rare case if your Samsung Galaxy SL I9003 refuses to turn ON or say if it gets stuck on the Motorola Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from the start.

So there you go, you have now successfully installed the latest version of Codename Android 3.5.0 firmware in your device. Do share with us in the comments section just in case if you face any issues.

Kamis, 06 September 2012

Download and install Galaxy S PLUS GT I9001 with ICS 4.0 based Ehndroix Custom ROM Firmware

Procedure to Install Ehndroix custom ROM firmware in Galaxy S GT I9001 PLUS:

Download the Ehndroix custom ROM firmware along with the Add On package from here to your computer. Once downloaded, you will then have to connect your Galaxy S GT I9001 PLUS device to computer with the help of original USB cable and place these two zip files in your device.

Disconnect the device and turn off the same so that it can be entered in the recovery mode. Recovery mode in Galaxy S PLUS I9001 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. Additionally, select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware.

Now, select “Go Back” and select “install zip from sd card” > “choose zip from internal sd card” and then select the Ehndroix custom ROM firmware first and then the Add On package which you have placed in your phone.

Once selected, it will take around 5 -6 minutes for applying this update. Also, for the first boot it will take more time than usual as it has to setup all the system files and other apps which are necessary ones. Ensure that you have cleared the cache in your device as it will wipe all the unwanted data from the recovery mode just in case if you face any force close issues in any of the Google Apps or the core apps present in your device.