Download and install - Update Galaxy S3 with Jellybean 4.1.1 WanamLite Custom ROM Firmware

 

Features of WanamLite Custom ROM Firmware for Samsung Galaxy S3:

• Based on latest Jelly bean update
• Deodexed & Rooted & Zipaligned
• Unlimited SMS recipient list
• 15 Toggle buttons
• Repacked & Tweaked & Insecure stock kernel (tweaks will still works on other custom kernels)
• Automatic SMS encoding (Arabic and other utf-8 encoding support)
• Tweaked Pegasusq Governor for better Battery life
• Large APN list
• No incremental ringtone
• Enabled Call recording
• 4 Way reboot (Recovery,Download…)
• Clean build.prop for best Market compatibility
• Stock Keyboard with all supported languages enabled
• Kies support
• Hacked Stock Email App
• Latest CWM Recovery update
• Latest SuperSu update
• Rooted+ insecure Tweaked Stock kernel with init.d support
• Enabled all supported languages
• Multi CSC (+80)

• How to Update Galaxy S3 with Jellybean 4.1.1 WanamLite Custom ROM Firmware

  
  
  Procedure to Update Samsung Galaxy S3 GT I9300 smartphone with WanamLite Custom ROM Firmware:
  
• Download the Wanam Lite custom ROM Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place this zip file in your Samsung Galaxy S3’s external SD Card.

• Once the file is placed, disconnect the phone and turn off your device so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” and then choose the Wanam Lite custom ROM Firmware Package which you have placed in your phone. It will take around 4 -5 minutes for applying the update.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully learnt on how to apply this update in your Galaxy S3.

•  

Download and install - Update Galaxy S3 with Jellybean 4.1.1 based Turkbey Custom ROM firmware

 

Procedure to Update Galaxy S3 with the Turkbey Custom ROM Firmware:

• Download the Turkbey Custom ROM Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and move the zip file to your external SD card which is there in your Galaxy S3 device.

• Don’t place the zip file in the internal memory of your S3 as it won’t detect the zip package. After placing the file, disconnect the device and turn off the same so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” and then choose the Turkbey Custom ROM Firmware which you have placed in your phone. Once it’s selected, it will take around 4 -5 minutes for applying the update. As soon as the update is applied, you will be needing to enter the Google Account settings along with other settings which you can find in the below mentioned video.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So, there you go, you have now successfully applied the latest Turkbey custom ROM firmware in your Samsung Galaxy S3 GT I9300 smartphone.

Download and install - Update Galaxy ACE S5830 with Final XWKT7 based Adrenaline Custom ROM firmware

 

Procedure to Update Galaxy ACE S5830 with Adrenaline based XWKT7 based Final Custom ROM Firmware:

• Download Adrenaline based XWKT7 Custom ROM Firmware package from here to your computer. Once downloaded, connect your phone to the computer and place this zip file in your phone.

• Ensure that you are not placing the zip file deep into the sub folders. Once copied, disconnect the device and download the “ROM Manager” app from the Google PLAY Store to flash the Clock Work Mod recovery image.

• Once flashed, select the option of “Reboot into Recovery Mode” in the ROM Manager app.  The recovery mode in the Galaxy ACE S5830 can be entered by Holding Menu Button and then Power ON the device. If the device turns ON in the normal mode then you need to try again to enter into the recovery mode.

• In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the Adrenaline based XWKT7 Custom ROM Firmware package which is placed in the phone.

• Once the file is selected, it will take round about 5 -6 minutes for applying the update. Please keep patience till the device finished the processing of firmware update.

Tip: If your Galaxy ACE doesn’t power up or say it gets into the boot loop mode, you need to re insert the battery and then re try the process of firmware update by following the above steps.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully installed the latest Adrenaline based XWKT7 based Final Custom ROM Firmware in your Galaxy ACE S5830.

Download and install - Update Galaxy GIO S5660 with Official Value Pack Gingerbread XXKTL 2.3.6 Firmware

 

Procedure to Update Galaxy GIO S5660 with Value Pack 2.3.6 XXKTL Firmware Update:

• Download the Value Pack XXKTL 2.3.6 Package and Odin Pack for S5660 from here to your computer. Once downloaded, open Odin in your computer and extract the XXKTL Firmware Package contents in your computer, preferably to the desktop.

• Open Odin in your computer and turn off your phone so that it can be entered in the Download Mode.

• The Galaxy Gio S 5660 can be entered into the download mode by holding the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device.
•  
• Connect your phone to the computer with the help of USB cable and then you will see that the ID : COM section will turn Yellow indicating that all the drivers have been installed and you are ready to proceed to the next step.

• Now, in Odin click on “OPS” to select “GIO_v1.0.ops” and then at the bottom of the Odin, click on “One Package” and select “S5660XXKTL_S5660XXKT7_S5660DBTKT1_HOME.tar.md5” file which you have extracted in the initial step.

• Once you have selected the files, click on the “Start” tab to start the process of firmware update. As soon as the update is applied successfully, the device will be restarted. Please note that the whole process might take up to 10 minutes. With the help of the progress bar in your phone, you can track the progress of firmware update.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

So, there you go, you have now successfully learnt on how you can apply this Value Pack Gingerbread 2.3.6 firmware in your Samsung Galaxy GIO S5660 device. Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Download and install - Update Galaxy ACE S5830 with Koogly’s Mokee Custom ROM Firmware

 

 

How to Update Galaxy ACE S5830 with Koogly’s Mokee Custom ROM Firmware

Procedure to Update Galaxy ACE S5830 with Koogly’s Mokee Final Custom ROM Firmware:

• Download Koogly’s Mokee Final Custom ROM Firmware Package from here to your computer. Once placed, connect your device to the computer with the help of original USB cable and place the zip file in your device. Ensure that you are not placing the file deep into the device.

• Disconnect the device from computer once you finish placing the zip file in your computer.

• Download the “ROM Manager” app from the Google PLAY Store and install the same. Once installed, open the same and select the option of “FLASH Clock Work mod Recovery” so that the custom recovery image is flashed. Up next select “Reboot in Recovery Mode” for entering the device in the recovery mode.

• You can also enter Galaxy ACE in recovery mode, press and hold the Menu Button and then Power ON the device. If the device turns ON in the normal mode then you need to try again to enter into the recovery mode.

• In recovery mode, select “install zip from sd card” > “choose zip from sd card” and select the Koogly’s Mokee Final Custom ROM Firmware Package which you have placed in your device. Once the zip file is selected, it will take around 3 -4 minutes for applying the same.

Tip: If your Galaxy ACE doesn’t power up or say it gets into the boot loop mode, you need to re insert the battery and then re try the process of firmware update by following the above steps.

So, there you go, you have now successfully applied the latest Koogly’s Mokee Final Custom ROM Firmware  in your Samsung Galaxy ACE S5830. Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Download and install - Root Galaxy S3 GT I9300 on XXDLIB Jellybean 4.1.1 Firmware

 

Procedure to Root Samsung Galaxy S3 I9300 on XXDLIB 4.1.1 Firmware:

• Download the XXDLIB 4.1.1 Rooting Package and Odin from here to your computer. Once downloaded, turn off your phone so that you can then enter your phone in the download mode.

• Extract the Odin zip to get Odin executable file and XXDLIB Rooting Package to get the tar file. Open Odin in your computer and turn off your phone so that it can be entered in the download mode.

• Download Mode in Galaxy S3 can be entered by pressing the Volume Down rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode. You can alternatively, enter your phone in the download mode with the help of below mentioned Video tutorial.

• Click on “PDA” to select “CF-Root-SGS3-v6.4.tar” and then click on “Start”. Once you click on start, it will take around 2 – 3 minutes for rooting the device.

• As soon as the device is rooted, the device will be rebooted. Once you see the home screen, you will have to disconnect the device from the computer.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

So there you go you have now successfully rooted your device. To check on whether your device is rooted or not, you will have to download the “Root Checker” app from the Google PLAY Store. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Download and install - Update Samsung Galaxy SL I9003 with Resurrection Remix Custom ROM Firmware

   

Procedure to Update Galaxy SL I9003 with Resurrection Remix Custom ROM Firmware:

• Download the Resurrection Remix custom ROM firmware package from here along with the Google Apps Package to your computer. Once downloaded, connect your phone to the computer and place these files in your device.

• Make sure that you are not placing the zip files deep into the sub folders. Once placed, disconnect the phone connected from computer and Open the ROM Manager app in your Samsung Galaxy SL I9003 to select the option of “Flash Clock Work mod Recovery” and then once its flashed successfully, select “Reboot into Recovery Mode” option in ROM Manager.

• In recovery mode, select “install zip from sd card” > “choose zip from sd card” and then choose the Resurrection Remix firmware package which you have placed in the device along with the Google Apps Package. It will take around 3 -5 minutes for applying the update.

• Once the firmware is updated successfully, the device will be rebooted and you will be prompted to enter the Google Account and Wi Fi Settings. Please note that if you face any force close errors, then enter the device in the recovery mode and select “Wipe data/factory reset” & “Wipe Cache partition” and then select “advanced” and clear the Dalvik cache.

• To check on whether the firmware has been updated or not, you can navigate to the path “Settings > About Phone” where you will get to see the details as shown in the below screen capture.

Note: If at all your Samsung Galaxy SL I9003 gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go, you have now successfully learnt on how to apply this firmware update in your Samsung Galaxy SL I9003.